Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 22-0680
LSU Tape Trunk
This trunk was designed for Louisiana State University’s equipment department to be a catch all utility storage solution for use in athletics and specifically for mulitple rolls of tape. The trunk features a large, bottom storage section built out of easy to clean black ABS. The interior also features 4 removable trays. All 4 are equal in size providing a dimension of 9 7/8” x 26 ¼” x 5 ¾”. Each tray features a hinged lid made from 3/8” clear Lexan. The trunk exterior is built out of 3/8” plywood with black exterior ABS laminate. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
- REFERENCE: 22-0680
- CATEGORY: Sports
Related Products
NY Jets Custom Coffee & Sewing Workstation
This case was designed for the New York Jets equipment management staff to be a mobile sewing workstation and coffee dispenser.
NY Jets Custom Equipment Room Workbox
This case was designed for the New York Jets equipment management staff to be a mobile equipment room workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x3 grid of pegboard mounted SmartJars that provide 24 individual storage compartments for small parts. The lid also features 8 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid also contains a custom insert for one cordless drill and one rivet gun. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
Eastern Illinois University Utility Trunk
This equipment trunk is designed to be a catch all utility storage solution for use in athletics. The trunk features an easy to clean black texture coated interior. The interior also features 2 removable trays. One tray is open for general storage; the other tray features 2 removable dividers that create 3 compartments. The trunk exterior is built out of 3/8” plywood with your charcoal exterior laminate color and also features three silkscreened prints of the three color Eastern Illinois logo. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large recessed latches and handles, recessed lid stays and round ball corners.
Custom Recruiting Trunk w/Removable Trays For Socks & Gloves
This trunk was built for West Virginia University’s football recruiting program. The trunk features 2 removable trays for gloves and socks. Each of the removable trays are designed to hang on the sides of the trunk.
Snap Attack / Aerial Attack Football Machine Trunk w/Generator
This trunk is designed to hold a Snap Attack football launching machine. The trunk is fully integrated with a 125ft power cable reel, and a gas generator for long distance or remote operation. The lids of the trunk fold down and feature nets for ball storage during use.
Penn State Sideline Drawer Trunk w/Fold Flat Lids
This trunk was designed for Penn State as a sideline storage unit. The trunk features 9 HD drawers and fold flat front lids for fast deployment.
University Of Louisville Pre-Game Trunk
This trunk was designed for the University Of Louisville to hold various cloth items used before games. The trunk interior is lined with .125” thick white HDPE plastic laminated to open cell PE foam. The plastic lined interior allows for easy cleaning and water resistance. The usable interior dimensions are 39.25” wide x 23.25” deep x 24.25” tall.
The trunk is built from LM Cases’ proprietary 1/2” thick composite panels laminated with red fiberglass exterior. The trunk exterior also features recessed vent dishes, deep recessed handles, stacking caster wells, 4” Colson casters and 5 prints of the University Of Louisville logo.
Cleveland Browns Field Trunk Workbox
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories, such as tape and various tools. The trunk lid features eight Tilt Lock bin units that provide sixteen individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features six drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top left drawer features two removable tape caddies built out of 1/2" marine grade plastic. Each tape caddy features ten spindles for a total of twenty. Two drawers are split into six compartments with removable dividers, and two drawers are split into twelve compartments with removable dividers. The bottom right portion of the case features a 20.5" wide x 10.625" tall open storage compartment for bags.
University Of Nebraska Tape Trunk
This trunk was designed and built for the University Of Nebraska as a portable tape storage unit. The trunk features 4 drawers with 2 removable bins ea with dowels for tape storage. The front lid is removable and becomes a table.
24” x 48” Half By Quarter Pack Utility Trunk
This trunk is perfect for storage of large heavy cables. The case interior is finished with durable black texture coating that can easily be wiped clean. The lid is supported by recessed lid stays that hold the lid open without the need for interior mounted cables or straps. Recessed lid stays are beneficial for "catch all" trunks, standard strap or cable lid stays can cause the lid to close unexpectedly if they are hit when loading/unloading the trunk.
24” x 24” Third Pack Utility Trunk
This trunk is perfect for storage of heavy cables. The case interior is finished with durable black texture coating that can easily be wiped clean. The lid is supported by recessed lid stays that hold the lid open without the need for interior mounted cables or straps. Recessed lid stays are beneficial for "catch all" trunks, standard strap or cable lid stays can cause the lid to close unexpectedly if they are hit when loading/unloading the trunk.
Waterproof Sideline Trunk
This trunk is designed to be a great waterproof solution for transporting gear to the sideline, it works exceptionally well in adverse conditions and on muddy fields. Because the case is waterproof, it is particulary suited for smaller teams that transport equipment in open pick up trucks The trunk features 12 compartments, 2 plastic removable bins and 8" field casters (2 locking/2 non).
Athletic Trainers Medical Kit
This case was designed for athletic trainers to be used in the sitting position. The top of the case features a small removable plastic bin with a removable 24 capacity tape caddy as well as 6 divided compartments for small items like medical supplies. The bottom of the case is accessed by a removable front lid that is magnetically stored on the back of the case and holds 4 removable plastic bins.
Mini Core Trunks
The LM Cases Mini Core Trunks were designed to be an excellent lightweight companion to our standard Core Trunk. (CLICK HERE for more info on the Core Trunk) The Mini Core Trunks have exterior dimensions of 22" wide by 22" deep and 18.5" tall and weigh 32lbs. The trunks are built out of a lightweight 3/8" honeycomb plasic and feature recessed lid stay's, 4 deep recessed handles, a black carpet lined interior, and stacking cups and feet. The trunks are designed to stack on each other and the regular Core Trunk (when equipped with the stacking option).
5 Drawer Locker Room Workbox
This trunk was designed for UCLA to provide a storage solution that can act as a cabinet when the team is home and can also be brought on the road. The trunk features 5 drawers and a removable lid that can double as a table.
Indoor Sports Storage Cart
This cart was designed for indoor sports and as an organizational cart for gyms. The cart is built to be exceptionally durable and easy to push. To accomplish this, we employed 5″ casters with a central locking brake system. To engage the brakes, simply push down on the red pedal; this simultaneously engages both brakes. The case also features a large 18″ stainless steel push handle for exceptional maneuverability.
The cart top is lined with 1/2″ UHMW plastic to provide a non stainable durable surface for water coolers and liquids. The cart interior features 2 built in drawers mounted on HD Accuride glides and 4 removable plastic tubs. The interior compartment is covered by a removable lid that is stored magnetically to the back of the cart when it is in use.
The cart exterior features 4 recessed handles and 2 spring loaded D-Ring shackles. The D-Ring shackles are great for mounting anything from ball bags to additional carry cases, adding another level of functionality. 2 coated cables with carabiners are included with the case for use with the D-Ring shackles.
Athletic Trainers Taping Trunk
This case is the pinnacle portable tape trunk for the mobile athletic trainer. The case features a removable front lid that turns into a table that is the same height as the case creating a work surface that is 94″ long! The case and lid are reinforced to support the weight of a player to allow for taping on either or both sides simultaneously. Also included is a blue Armasport 24″ x 72″ x .625″ foam pad to put on the work surface. The pad is designed to hang over the side of the lid or case to provide maximum comfort to the athlete.
Portable Athletic Trainers Tape Kit
This case is designed to be a light weight waterproof solution for the mobile athletic trainer. The case features a removable plastic bin with a removable tape caddy that hold 120 rolls of 2″ tape. Below the bin are 6 compartments with removable plastic dividers that can hold anything from cold packs and bandages to stethoscopes and portable AED’s. The case comes complete with a handy erasable white board mounted in the case lid.
The exterior case is a Pelican 1630 which is completely waterproof and features an unconditional lifetime guarantee.
Standard Field Trunk
This trunk is designed to be a catch all utility storage solution for use in athletics. The trunk features an easy to clean black texture coated interior. The interior also features 2 removable trays. One tray is open for general storage; the other tray features 3 removable dividers that create 4 compartments. The trunk exterior is built out of 3/8” plywood with your choice of exterior laminate color. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. Hardware includes flat triangle corners, recessed lid stays and 4 deep recessed handles.