Products
L5-15 Locking Power I/O Panel w/Fiber Jack
The L5-15 Locking Power I/O Panel with Fiber Jack is a custom rack-mounted interface panel designed to serve as the primary power and signal connection point for a professional workstation built around a Midas Pro2 console. Combining secure locking power connectivity with fiber and network infrastructure, the panel centralizes critical system connections into a single organized interface, simplifying deployment and improving system reliability.
Power enters the system through a Hubbell HBL4716C NEMA L5-15 locking flanged inlet, which feeds two rear-mounted duplex outlets for powering equipment within the rack or workstation. The locking connector helps prevent accidental disconnection while maintaining compatibility with standard non-locking inlet configurations when required.
In addition to power distribution, the panel provides professional signal connectivity through a Neutrik NO4FDW-A quad fiber optic connector and two Neutrik NE8FDX-P6 EtherCON network connectors. Two additional blank D-series punch locations are included for future expansion, allowing the panel to be customized as system requirements evolve.
Constructed as a custom LM Tour Systems integration product, the panel delivers a clean, professional interface for audio consoles, broadcast systems, production workstations, server racks, and other technical environments where power, fiber, and network connectivity must be organized into a single access point.
Shure Microflex Complete Wireless Conference Mic Kit Case - 15 Capacity
The Shure Microflex Complete Wireless Conference Mic Kit Case – 15 Capacity is a custom transport and storage solution designed specifically for the Shure Microflex Complete Wireless (MXCW) conference system. Built for corporate boardrooms, government facilities, convention centers, universities, houses of worship, and mobile conference providers, the case securely organizes and protects a complete 15-user wireless conferencing system in a single transportable package. The case accommodates 15 microphones, 15 MXCW640 wireless conference units, one MXCWNCS network charging station, and one MXCWAPT access point transceiver.
A removable microphone tray allows conference microphones of varying lengths to be stored safely while keeping them separated and protected. The tray is constructed from marine-grade plastic and custom-cut foam designed to accommodate the different microphone options available within the Microflex Complete product family. Below the tray, each wireless conference base station is stored in its own dedicated compartment, ensuring fast inventory checks and preventing equipment movement during transport.
The custom foam interior is housed within a rugged SKB iSeries 3i-3424-12 waterproof case, providing protection from impact, dust, and moisture while offering convenient transport for large conference systems. The result is a professional-grade storage and deployment solution that helps organizations quickly set up, transport, and protect their investment in Shure's Microflex Complete Wireless conferencing platform.
1U Half Rack Width Power Distribution Unit
Compact 1RU half-rack width power distribution unit with four AC outlets, a front-mounted IEC power inlet and LED power indicator. Designed for LM Cases half-rack systems, it provides a clean, space-saving power solution for audio, video, networking and production equipment.
Shure Microflex Complete Wireless Conference System Mic Case
This custom Pelican case is designed to hold the Shure Microflex Complete wireless mic conference system. The case holds 5 MXCW640 base stations, a MXCWAPT access point transceiver and a MXCWNCS charging unit. A removable tray has storage for 8 microphones allowing various lengths to be sent with each system. The mic insert is designed around the MXC416DF and the MXC420DF microphones. The waterproof Pelican 1620 case features wheels and a retractable handle.
Arri S30C Skypanel Roadcase
This case is designed to hold 2 Arri S30 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Chauvet Color Strike Road Case - 6 Capacity
This custom road case is designed to hold 6 Chauvet Color Strike lights. Each fixture is held in a custom CNC cut foam compartment. A large 46.5” x 6.75” x 16.125” carpet lined accessory compartment is provided for misc items.
Arri S60 Skypanel Case - 2 Capacity
This case is designed to hold 2 Arri S60 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Socapex Break Out & Switch Panel Set
This custom Socapex panel set was designed for a theatrical application where it was requested for switched control over 6 duplex outlets. Power is fed into the system via Powercon connector and is split evenly through 6 switches, then to 6 outlets. The 46-578 switch panel is designed to be desk mounted allowing for fast access with the 46-479 outlet panel being mounted on the rear rail of a rack. A 3ft Socapex extension cable connects the 2 boxes. Should the user desire to use the outlet panel in a different location, a standard Socapex extension cable can be used. The 46-479 outlet panel can be used with any standard Socapex cable/distro as a breakout.
Varilite VL2600 Profile Light Road Case
This custom flight case is designed to hold 2 Varilite VL2600 Profile light fixtures. Each fixture is held in a custom CNC cut, PE foam insert that contours the shape of the light fixture. The usable interior height of the case from the bottom of the insert to the lid foam is 34”.
MA3 Command Wing Workstation Road Case
This custom road case is designed for the MA Command Wing. The MA Command Wing is held in place via custom marine grade plastic brackets within a ½” Baltic Birch structure. The structure includes a ¾” Baltic Birch doghouse behind the controller to keep cables hidden. Within the doghouse, a 4-Plex courtesy outlet bank is provided for accessory items like a small computer. A right angle, locking IEC is provided for powering the control surface. A 1RU keyboard/mouse unit is provided for control.
Custom Rack Drawer For Apple M1 16” MacBook Pro Laptop
Custom 2U rack drawer designed specifically for the Apple MacBook Pro 16” M1 laptop. Features a precision CNC-cut foam insert with dedicated compartments for the laptop, power supply, and accessories. Built into a heavy-duty Penn Elcom tour-grade rack drawer with rear support brackets and cable gland provisions, making it ideal for touring, playback rigs, broadcast systems, and mobile production environments where secure transport and quick deployment are critical.
Elation FuzePar z120 Light Fixture Case - 6 Capacity
This case is designed to hold 6 Elation FuzePar z120 light fixtures. The case interior is carpet lined with 1” PE foam under each light fixture. The lights are separated via a ½” black marine grade plastic divider network. 2 removable carpet lined trays are provided for accessory storage.
6 Drawer Craftsman Tool Chest w/Tour Grade Flight Case
A heavy-duty mobile tool chest designed for production and technical workflows, featuring integrated power, a functional work surface, and tour-grade construction for reliable use on-site or on the road.
Elation Level Par Q7 Light Case - 6 Capacity
This case is designed to hold 6 Elation Level Par Q7 light fixtures. The case interior holds each fixture in a custom PE foam lined compartment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The exterior features 4 deep recessed handles, 4” Colson casters, stacking caster wells and recessed lid stays.
Chauvet ColoRado Solo Batten Road Case - 3 Capacity
This case is designed to hold 3 Chauvet ColorRado Solo Batten fixtures. Each fixture is held in a custom PE foam lined compartment. A carpet lined accessory compartment is provided for misc storage. The case exterior is built from ½” plywood laminated with your choice of ABS colors. The hardware set features 4 deep recessed handles and stacking caster wells in the lid. Recessed lid stays are provided. The case rides on Colson 4” x 2” HD casters mounted through a full sized ¾” caster board.