Products
27” iMac Video Production Fly Pack
This case is designed to hold a 27” iMac mounted on a position control board. The board is mounted to position control hinged that allow the computer to tilt and be held in position similar to a laptop screen. The computer is interfaced to the mount board via an articulating Chief mount that allows the computer to telescope away from the mount board and be moved to the right or left of the case. The computer is mounted to the Chief mount via an included Apple VESA mount adapter. Below the computer is a shock mounted 12 space rack that includes front & rear pre-tapped 10/32” rack rail. The rack includes a 1RU slide out shelf for the computer’s keyboard. The case includes table legs mounted in one of the lids. The case exterior includes 8 deep recessed handles and rides on 4” Colson casters mounted to a full ¾” plywood caster board.
Clear-Com FreeSpeak II Intercom System Case
This case was designed to hold a Clear-Comm FreeSpeak II system. The case holds the contents of the system in a CNC cut foam insert, mounted in a Pelican 1640 case. The foam insert holds 2 FSII-SPL splitters, 1 antenna compartment, 5 belt pack compartments, and 1 open accessory compartment. The case also features a removable tray that includes a removable rack shell that holds the FSII-Base-II and an open compartment for the head sets.
RCF TT052A 4 Capacity Speaker Case
This case was designed for Applied Audio to hold 4 RCF TT052A powered speakers. The speakers are held in 4 individual compartments. Each compartment is separated by a custom CNC cut ½” marine grade plastic divider with a routed in notch to make the speakers easier to handle. A removable 3/8” plywood tray is included for storage. The usable dimensions of the tray are 26.5” wide x 19” deep x 6” tall. The case exterior is built out of 3/8” plywood laminated with ABS plastic. The exterior features 4 deep recessed handles, 2 recessed lid stays, 4” Colson casters (2 locking), stacking caster wells and a route out for a McLoone dry erase road case label
Yamaha PM10 Rivage Mixing System Case Set
The console case is designed to hold the Yamaha CS-R-10 control surface, which is part of the PM10 Rivage system. The case holds the control surface on a ½” Baltic birch internal structure that traps the surface by its feet. The internal structure supports a slide out keyboard shelf at the front and a doghouse at the back. The control surface is supported by 2” PE foam at all points. CNC cut foam blocks that match the contour of the console are provided to ensure that all parts are supported during transport. The back of the control surface is covered and supported by a custom doghouse. The doghouse is built out of ¾’ Baltic birch and features a top lid that hinges flat against the back of the doghouse. The back of the doghouse also features 2 removable vented panels that secure with HD Southco slam latches.
Compact Flypack Production Workstation
This case is designed to be a portable video fly pack workstation. The case includes a Chief FTR1U tilting monitor mount allowing a monitor to be mounted in the case lid. Also included are two slide out shelves to hold a laptop, audio mixer or a video switcher. Below the dual slide out shelf’s is a 9RU rack section. The rack rails are mounted to the case via rubber vibration isolation mounts. The rack section features rear rack rail and a trap door. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors. The case features deep recessed hardware and rides on 4” Colson casters mounted on a ¾” caster board that spans the entire bottom of the case.
Akai APC40 MKII Pelican Case
This case is designed to hole a Akai MPC40 MKII Controller. The controller is held in a custom CNC cut foam insert built out of PE foam capped with a ¼” marine grade plastic top piece. The foam insert features 2 hand slots to help remove the controller and an accessory compartment underneath. The insert is built as an assembly, this assembly is mounted into a Pelican 1495 case.
Yamaha TF1 Mixer Case With Doghouse
This case was built for Audible Difference Inc. to hold a Yamaha TF1 mixing console. The console is held in a custom designed 2” foam interior. Holding the console in place in the case tray is a custom CNC cut 2” PE foam insert. The foam insert follows the tapered shape of the console allowing it to be supported along all points, not just the widest point. Cable connections to the console are hidden behind a custom doghouse. The doghouse is built out of ¾” Baltic Birch plywood and finished with black texture coating.
D&B D80 Amp Rack Breakout Panel
This panel was built for Headline Productions to provide central connection point for their D&B D80 amp racks.
United States Naval Academy Football Program Communications Trunk
This case was built for Navy University Football. The trunk is designed to hold headset communication equipment and general accessories on the team’s sideline.
Stillhouse Whiskey Dispenser Trade Show Display Case
This case was built for Stillhouse Whiskey to hold 2 dispensers at trade shows. The case features one dispenser on display with an accessible drawer and the other stored below in a custom foam lined compartment.
12RU 24” x 30” Truck Pack Shock Mount Rack
This case is designed for touring applications where truck pack dimensions of 24” x 30” are crucial. The case features a 3/8” plywood inner rack shell with front and rear rail with 10/32” pre-tapped holes. The inner shell features a rail to rail depth of 20.5” with .5” recess on the front and rear rails. The case features 3.5” deep front and rear lids which allow for a clearance of 4” extending beyond the front and rear rack rails. The inner shell is shock mounted with 2” foam above and below, with 1” foam protecting the sides.
Custom Portable Entertainment Center Road Case
This case was designed for the Bubble Group as a portable entertainment center. The case comes fully integrated with a 55” Sony smart monitor, Xbox One, PlayStation 4, Apple TV, courtesy charging USB power outlets and a digitally controlled full range audio system.
2RU Mobile Entertainment Center Control Rack Panel
This 2RU rack mount panel was designed to be the control center of a mobile entertainment system. The panel is built from .125” thick black anodized aluminum with all labels being laser etched. Featured are a Siemens 30mm push button and indicator light. The push button initiates the power sequencer to power up/down all the components of the case. The indicator light is the last element in the power chain; once the sequence has completed the light illuminates. Also featured is a waterproof HD up/down switch that controls an electric lift that a monitor is mounted on. Centered in the panel is a Leviton courtesy outlet that features Edison outlets and 2 USB outlets. 5 USB outlets are provided for device charging. Male XLR jacks are provides for a main output of the system to an additional set of speakers. Input signals are handled through Datapro brand panel mount HDMI, 3.5mm audio jack and a USB 3.0 jack. All Datapro input jacks feature recessed milling on the rear of the panel.
2RU Airline Carry On Fly Rack
This case is designed for touring engineers who require outboard rack mounted gear. The Pelican 1510 case is designed to be carried on and stored in most overhead compartments on commercial airlines. The interior rack is built from ½” Baltic Birch and finished with black texture coating. The rack features 2 recessed black handles. Front rail depth is set at 1” to allow for knobs and connectors on equipment, the rear rail is set at ½”. Different rail recess options adds functionality, allowing the user accommodate most pieces of outboard equipment.
Universal Audio Apollo Twin/Duo Case
This case is designed to hold the Universal Audio Apollo Twin desktop recording interface. The interface us is held in a custom CNC cut PE foam insert. A storage compartment is included to hold the power supply and Thunderbolt cable. The exterior case features a spring loaded surface mounted handle and 2 twist latches.