Products
Sony FW100BZ40J 100” Monitor Road Case
This case is designed to fit a 100” Sony FW100BZ40J monitor. The center of the case features a ¾” Baltic Birch structure to support the monitor. The face of the monitor is protected via non-abrasive 1” Crosslink foam. The monitor is strapped to the center structure allowing the lids to be removed while having the monitor supported. A rear carpet lined accessory compartment is provided for storage.
Panasonic RZ970 Projector Case w/Lens Storage
This custom case is designed hold a Panasonic RZ970 projector with a separate lens compartment. The projector is held in a custom CNC cut, PE foam insert. A 14” x 14” x 1.75” accessory compartment is located under the projector for small parts and cables. A separate lens compartment with dimensions of 7” x 7” x 7.75” is also provided for storage. An additional carpet lined accessory compartment is provided for larger items.
Sony PVM-X2400 24” Monitor Case
This custom case is designed to fit the Sony PVM-X2400 4K Trimaster high-grade picture monitor. The case holds the monitor in a custom CNC cut foam insert. The monitor is held in a “face up” position. The case exterior is built from ¼” plywood, laminated with charcoal ABS plastic. The case features 3 recessed handles and a custom silkscreen of the Panavid logo.
Barco TLD .4:1 90 Degree Lens Flight Case
This case is designed for the Barco TLD .4:1 90-degree projector lens. The lens is held in custom CNC cut crosslink foam cradles. The lens is supported at all stress points. The nonabrasive foam prevents scratching and allows the lens to be transported without its lens caps attached.
Locker Room Supply Trunk
This locker room supply trunk is designed to be a convenient storage solution and workstation for a variety of applications. The truck can easily be used for equipment managers and athletic trainers alike.
24ch IEM Rack w/Mic Split Panel
This custom, fully integrated in ear monitor rack was built for Spirit Of The Bear. The system is based around a Behringer X Air XR18 mixer. It includes a Shure PSM300 IEM transmitter, a Luxul router, Unifi access point, a modified Tripp Lite RS1215 and a custom built 24ch mic splitter panel with a custom laser etching of the band’s logo.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
4 Space Fly Rack For Deep Equipment
This 4RU portable flypack is designed with deeper rack equipment in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 18”, 17.5” and 16”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage.
Audio Technica 4047/SV Stereo Pair Microphone Case
This heavy-duty carrying case is designed for two Audio Technica 4047/SV large diaphragm condenser microphones. The case features a custom cut, PE foam insert that contours the shapes of the microphones and shock mount baskets. The foam insert is designed to hold 2 AT 4047/SV mics, 2 AT 8449a/SV shock mounts and a generic compartment for a K&M stereo bar.
6 Drawer Video Workbox
This video tech workbox was built for Kelson Productions in NYC. The custom built workbox features 6 heavy duty drawers, 3 of which have configurable dividers.
5 Drawer Workbox w/270 Degree Fold Flat Front Hinged Lid
This custom 5 drawer workbox was built for IKO Productions. The case features an OD of 24” x 30” with a 270 degree fold flat front door.
6 Drawer Sideline Window Trunk
This 6-drawer sideline window drawer trunk was designed for West Virginia Football. The trunk features 6 equally sized drawers with interior dimensions of 10.875” wide x 22” deep x 12” tall. Each drawer is built from ½” Baltic Birch plywood, finished with black texture coating and mounted on HD Accuride glides.
Large Format Sports Nutrition Trunk For West Virginia Football
This large format trunk was designed for the West Virginia Football Sports Nutrition Dept. The trunk is designed to dispense common foods like fruits and bars. The trunk features a 45qt Yeti cooler, removable table that secures to the trunk and a custom power distribution unit that features a combination of AC and USB A outlets.
Custom Recruiting Trunk w/Removable Trays For Socks & Gloves
This trunk was built for West Virginia University’s football recruiting program. The trunk features 2 removable trays for gloves and socks. Each of the removable trays are designed to hang on the sides of the trunk.
Yamaha CL3 Mixing Console Case
This custom road case is designed for the Yamaha CL3 console. The console is protected by 2” foam blocks at all key stress points. Custom Crosslink foam pieces are located in the nose lid that contour the shape of the console’s palm rest. A custom doghouse covers the I/O section of the console. The doghouse is built from ¾” Baltic Birch plywood and is finished with black texture coating. The lid features double hinges allowing it to swing fully back for full access to all connections.