Products
Boeing 6 Capacity Monitor Trade Show Shipping Case
This case was designed for Boeing to transport 6 monitors for use on a custom display cart. The case holds 3 Samsung 60" & 75" monitors in an upright configuration. Due to the size of the monitors, the design allows them to slide into compartments so minimal lifting is required to load and unload the case.
Oxygen Event Works 4RU Pull Over Rack
This case was built for Oxygen Event Works for video processing equipment. The case features a removable 4RU inner rack shell and an independent foam lined exterior case.
Oxygen Event Works Audio Adapter Trunk
This case was built for Oxygen Event Works as a way to carry miscellaneous parts and adapters for audio systems. The trunk features 2 removable trays for adapters and removable dividers in the main compartment for segregating cable and other items. The case and trays are made from high quality Baltic Birch and finished in gray texture coating.
Installed Brahler Microphone Workbox
This case was designed to be an installed workstation for Conference Systems. The case holds 40 Brahler TMD/01 gooseneck microphones, D-Doc and D-Mic bases in 9 custom drawers. The case lives in a venue and never sees road use, all drawers are held closed by 2 hinged panels secured with large valance spanning latches.
L3 Noise Reducing Server Isolation Rack
This case was designed for L3 Power Paragon as a portable solution to reduce the noise of their ruggedized servers that were being used in an office environment. The case provides a 16RU shock mounted rack section for the servers, in addition to a 1RU LCD Console section and a 4RU patch section. The case is designed to target specific fan noise frequencies and reduce them by 15 - 20 decibels. The case works by enclosing the servers and moving large amounts of air around them to keep them cool. Several fans pull cold air in through the bottom and additional fans exhaust the hot air through the top of the case. Each ultra quiet fan is rated at 18 decibels.
Evonik Portable Server Rack
This case was built for Evonik Industries as a way to transport servers to and from events. The case features a 12RU server section with a dedicated 1RU KVM section and a 4RU patch section. In addition to the rack sections, the case also features a storage drawer for power cables and other accessories. The case features a custom rack panel, PDU and fans installed by the LM Cases Custom Integration department.
2017 Signature Amenities Trunk
This self-contained mobile concession case functions as a portable cafeteria, integrating a refrigerator, microwave, electric grill, Keurig beverage maker, and Bose Sound Dock III into a single tour-ready unit. Designed for green rooms, locker rooms, and event spaces, it features heat-resistant compartments, slide-out shelves, custom-contoured mounting, three heavy-duty drawers, and centralized power with a retractable 30ft extension cord. Built from 3/8" plywood with black ABS laminate, recessed hardware, and 4" casters, it delivers durable mobility and turnkey convenience.
48 Capacity Charging Flight Case
This case is designed to be a mobile charging and storage solution to hold 48 devices in individual compartments. There are 3 - 16 port USB charging hubs that also function as sync units that allow data to be pushed to 16 devices simultaneously.
Sideline Tool Workstation
This case is designed to be a all in one tool box for mid game repairs on the sideline. The trunk features a Rigid 18v drill and charger, and 3 sets of Tilt Lock bins mounted in the lid. Below the lid, is a large work surface built out of 1/2" marine grade black plastic that provides a softer surface for working on helmets. The trunk features 6 drawers mounted in an isolated inner shell, the drawers are all 19.5" wide x 21.75" deep; 2 of the drawers are 4" tall and 4 of the drawers are 11" tall.
Deluxe Sports Nutrition Trunk
This trunk was designed to be a all inclusive sports nutrition workstation. The trunk features 15 cubbie compartments in the top portion of the case for bars and other food items. The top of the trunk also features two removable wire baskets for fruit. The baskets include custom hangars that allow them to sit flat against the side of the trunk. Below the top work surface are 4 drawers mounted on HD Accuride glides and finished with black texture coating. The trunk also features a Pelican 30qt cooler that is held on a slide out dolly. The Pelican cooler is very heavy duty and is designed to keep ice from melting for 7-10 days. The cooler is accessed, and loaded/unloaded from the trunk by placing it on a slide out dolly that allows the cooler to be moved in and out of the trunk with out lifting.
32 Capacity iPad Charging Pelican Case
This case is designed to be a portable charging solution allowing USB devices like tablets and phones to be charged on the road. The charging components also allow the devices to be sync'd and updated in groups of 16 at a time for fast updates and data pushes. Each unit is stored in its own individual compartment. The case features a vented clear Lexan lid that allows the units to be locked while they are charging. The vented Lexan lid allows the devices to remain cool as well as visible when they are securly charging.
Cedar Lined Suit Jacket Wardrobe Case
This case is designed with the transportation of suit jackets in mind. The case features a Cedar wood lined interior with Cherry corner accents to provide an elegant way of transporting clothing from event to event. Each section of the case features a bronze color hanging bar to hold 20 hanging jackets per side for a total of 40 jackets.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.