Products
48 Point SDI Rack Mount Hinged Patch Panel
This panel is designed to handle 48 BNC jacks for video applications. The panel features 48 Neutrik NBB75DFIB-B jacks installed into a 5RU hinged panel. The panel features an integrated rear lacing bar to secure cabling. A twist latch is provided to secure the panel to rack rails. Mounting holes are also provided should the user require them. The panel is built from .125” black anodized brushed aluminum.
15amp 2RU Custom Branded Power Input Rack Mount Panel
This panel was built for Twist Integration Solutions. The panel is designed to be the main power input source for their integrated systems. Power is brought in via a Hubbell 15amp recessed inlet. A red LED indicator light illuminates when voltage is present. Power is routed to a front mounted courtesy outlet and a white rear mounted outlet.
Outer Transport Case For LM 4RU Studio Outboard Rack
This outer case is designed to transport the LM Cases 16-0928 4RU Studio Outboard Rack. The case allows the rack shell to be easily loaded and removed. The shell is supported on all four sides by 1” Ester foam. The corners of the case are open to provide grab points to remove the rack shell. All surfaces not covered by foam are finished with black carpet.
10RU Pocket Door Amp Rack Road Case
Pocket doors racks are designed for touring applications requiring a truck pack sized case with tethered lids. The lids open with a single latch and can be retracted into the sides of the case preventing lost lids and saving storage space. The rack section is shock mounted and features 24” rail to rail usable space. The front rail features adjustable recess points mounted via custom removable bolt plates. The mid and rear rails are adjustable via sliding tracks, all rails can be moved using a simple 1/4" wrench. The exterior case features stacking caster wells allowing multiple racks to be stacked. Also featured are 4 deep recessed handles and Colson 4” x 2” casters.
16RU Studio Outboard Rack w/Casters & Dove Tailed Corners
This rack is designed to be the perfect complement to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch and features beautifully dove-tailed end joints; all edges are rounded, and the rack is finished with a light coating of clear lacquer. The rack features an 18” deep shell. The front rail is recessed 1”, with the rear rail recessed ½”. This allows a rail-to-rail depth of 16.5”. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish. The rack rides on 3.5” casters, with the front 2 locking.
DSK-ES Switched Desktop Courtesy Power Box w/True1 Connectors
The LM Tour Systems DSK-ES desktop courtesy power panel is designed to be a central power panel for racks, and workstations that may not have room for rack mount power distribution. Other applications include separate switched outlets for monitors, or speakers that need to be switched off independently.
1RU Custom Powercon® / Fiber Jack IO Panel
This 1RU panel is designed to be an excellent in/out panel for fiber system racks. The panel includes a main Powercon input, with a loop Powercon output to power additional racks. A LM Tour Systems Powercon cable can be added to compliment the panel. 2 spaced Edison AC receptacles are provided in a fully enclosed back box to provide power to rack components or power distribution units. 2 D Series punches with knock outs are provided to accept the fiber jack of your choosing. The panel is built from .063” black anodized, brushed aluminum.
Elation CW Profile HP Ellipsoidal Light Fixture Road Case - 6 Capacity
This case was built for Nvidia. The case is designed to hold 6 Elation CW Profile light fixtures with their clamps attached. Each light compartment features usable dimensions of 10.875” wide x 10.875” deep x 31.75” tall. The lights are held in individual compartments created by a ½” marine grade plastic divider network. 2” Ester foam laminated with .125” thick white HDPE is positioned under each light to provide shock protection for each light. The foam/HDPE combo is soft enough to not damage the gel frame holders. A carpet lined accessory compartment is provided for additional storage.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
Generic Monitor Case w/Heavy Duty Electric Lift
This case is designed for customers who already own a monitor who would like to handle the integration themselves. The case comes with a heavy duty electric lift installed with a mount, ready to receive your monitor.
Novation Bass Station II Synth Road Case
This case is designed to hold the Novation Bass Station II analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 1 surface mounted handle is provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors. The plywood panels are wrapped with our XL Series extrusion with integrated tongue and groove for a light weight, and durable exterior.
Moog Subsequent 25 Analog Synthesizer Road Case
This case is designed to hold the Moog Subsequent 25 analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 3 recessed handles are provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.
Antari M7 Stage Jet Fog Machine Case - 4 Capacity
This case is designed to fit four Antari M7 fog machines. Each machine is held in a custom CNC cut foam insert that contours its shape including the wireless receiver, safety shackle, and handles. A 3.5” deep carpet lined accessory compartment is included for misc. items like True1 Cables, safety tethers, and clamps.
6 Space Preview Monitor Shallow Rack
This rack is designed to hold shallow equipment such as rack-mounted broadcast preview monitors and battery chargers. The rack features front rail that is recessed ½” from the lid split. Pre-tapped 10/32” rack rail is provided for easy installation. 1 lid mounted recessed handle is provided for transport.