Products
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
LSU Tape Trunk
This trunk was designed for Louisiana State University’s equipment department to be a catch all utility storage solution for use in athletics and specifically for mulitple rolls of tape. The trunk features a large, bottom storage section built out of easy to clean black ABS. The interior also features 4 removable trays. All 4 are equal in size providing a dimension of 9 7/8” x 26 ¼” x 5 ¾”. Each tray features a hinged lid made from 3/8” clear Lexan. The trunk exterior is built out of 3/8” plywood with black exterior ABS laminate. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
New York Jets Sideline Workbox
This case was designed for the New York Jets equipment management staff to be a mobile workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 5x5 grid of pegboard mounted SmartJars that provide 25 individual storage compartments for small parts. The lid also features 8 compartments constructed from 3/8" clear Lexan. Each compartment features a hinged door with a Southco slam latch. The lid is supported by two ratcheting lid stays. These allow for the lid to be positioned at multiple angles to protect interior contents in the event of inclement weather or high winds.
Univ Of Utah Athletic Trainers Sideline Trunk
This custom sideline trunk was designed for the University Of Utah to be an all-in-one storage solution for sidelines.
Eastern Illinois University Utility Trunk
This equipment trunk is designed to be a catch all utility storage solution for use in athletics. The trunk features an easy to clean black texture coated interior. The interior also features 2 removable trays. One tray is open for general storage; the other tray features 2 removable dividers that create 3 compartments. The trunk exterior is built out of 3/8” plywood with your charcoal exterior laminate color and also features three silkscreened prints of the three color Eastern Illinois logo. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large recessed latches and handles, recessed lid stays and round ball corners.
Indianapolis Colts Athletic Trainer’s Sideline Trunk
This custom sideline athletic trainer’s trunk was built for the Indianapolis Colts. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored on the sideline during the game.
Chicago Bears Athletic Trainer’s Hotel Trunk
This custom athletic trainer’s trunk was built for the Chicago Bears to be used in their hotel facilities while travelling.
BYU Athletic Trainer’s Wardrobe Trunk
This custom athletic trainer’s wardrobe trunk was built for the Brigham Young University football team. The case features a large hanging clothes section with a HD hanging bar. The clothes section features a trap door on the side allowing users to throw dirty clothes in the side of the closed case at the end of an event. Clothes are contained in the hanging section by a heavy duty 3/8” thick clear Lexan door. Below the hanging section is one heavy duty drawer with removable marine grade plastic dividers for clothing and miscellaneous items.
BYU Athletic Trainer’s Workbox
This custom indoor athletic trainer’s trunk was built for the Brigham Young University football team. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored indoors during games.
Custom Wardrobe Basket Tour Case
This custom wardrobe basket case is designed for organizing and transporting lightweight costume pieces and accessories. It features two separated sections with individual compartments for wire baskets and a heavy-duty storage drawer for larger items, all isolated within a shock-absorbing inner shell for added protection. Built with durable laminated plywood, recessed hardware, and heavy-duty casters, the case delivers efficient organization and reliable performance for touring and production use.
Clay Packy Arolla Profile MP 2 Capacity Light Fixture Case
This custom case was built for Mohegan Sun Casino for the Clay Packy Arolla light fixture. The case holds 2 fixtures in custom CNC cut PE foam compartments. Each foam block contours the shape of the fixture. The fixtures ride with their lenses facing down allowing them to be truss mounted in the case. A carpet lined accessory compartment is provided for general storage.
Printer Workbox w/Rack Section & Custom Bourbon Barrel Laminate
This custom case built for Studio 46 is a portable, on-site printing station that combines a slide-out laser printer shelf, two storage drawers, and an integrated 6RU rack section for networking and power equipment. The rack includes a custom LM Tour Systems courtesy power distribution unit with USB charging, additional courtesy outlets, and a power system featuring a retractable cable reel and automatic voltage regulation. Finished in a bourbon barrel–themed laminate and equipped with heavy-duty touring hardware, the case delivers a polished, all-in-one mobile workstation designed for reliable use in live and production environments.
L14-30 Power Distro w/True1 Outlets & L5-20 Tails
This custom L14-30 power distribution unit was built as the main power distributer for a video flypack. The distro is built from .125” black anodized brushed aluminum and is 2U tall with a 6” deep chassis.
Video Wall Flypack w/Custom IO & Power Distribution
This custom video flypack was built for Sure Sound & Lighting as a central hub for video wall processing. The flypack features 3 monitors, triple wide patch sections, a slide out worksurface, a 14RU shock mount rack section and a custom IO panel and power distro.