Guitar Amps
Road Case For Benson Vinny / Benson Nathan Junior Amp
This custom rolling road case is designed specifically for the Benson Vinny and Nathan Junior combo amplifiers. Built from lightweight ¼” plywood with durable ABS laminate, it features 1.5” PE foam lining and a precision-cut foam support block with an accessory compartment beneath the amp. Recessed hardware and locking 3.5” casters make it tour-ready while allowing the amp to remain in the tray during performance or elevate on the lid for better stage projection.
Benson Monarch Reverb Amplifier Case w/Custom Stencil, Silkscreen & Pink Color
This custom road case by LM Cases is built to protect and transport a Benson Monarch Reverb guitar amplifier. The case features a foam-lined interior with added shock protection, a dedicated accessory compartment, and precise foam cutouts to secure the amp and handle. Constructed from durable plywood with ABS laminate, the case includes stacking caster wells, locking casters, and custom exterior branding for reliable touring use.
Dr. Z Z80 2x12 Cabinet Road Case
This custom case built by LM Cases for the Steve Miller Band and designed for the Dr. Z Z80 2x12 speaker cabinet. The case features a pull over lid with the cabinet living in the case’s tray. The interior is lined with 1” PE foam with 2” PE foam under the cabinet. The 2” bottom foam block features cut outs in the corners allowing the rubber feet to “float”.
Dr. Z Z80 Guitar Amp Head Road Case
This custom flight case is designed for Steve Miller for the Dr. Z Z80 amp head. The case interior is lined with 1” PE foam. A 14” wide x 7” deep x 1” tall accessory compartment is located under the amplifier for storage.
Amplified Nation OverDrive Reverb Guitar Amp Case
This custom case was built for Lake Baum for his Amplified Nation Overdrive Reverb amplifier and 1x12 cabinet. The custom case lid configuration allows it to operate as a “live in” or a “pull over”.
Dr. Z X-Ray Combo Amp Road Case
This custom case is designed for the Steve Miller for his Dr Z X-Ray Combo guitar amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Fender Pro Sonic Amp Case
This case was designed for Elevate Life Church to hold their Fender Pro Sonic combo amp. The case has a 1" PE foam lined interior with a 2" PE foam bottom under the amp. The exterior case is built out of 3/8" plywood laminated with black ABS plastic and features deep recessed handles, and 4" Colson casters.
Vox AC15 Amp Case
This case is designed for the Vox AC15 combo amp. The amp is held in a 1” Ester foam lined interior with a 2” PE foam bottom under the amp. The exterior case is built out of 3/8” plywood and features 4 latches, 2 deep recessed handles and 4” Colson casters with a full 3/4” Birch caster pad.
1959 Fender Bassman Road Case
This case was designed for the backline department of Mohegan Sun casino. All of the combo amp cases for the casino are designed to be the same size allowing them to easily stack in the limited storage space of their arena.
Silvertone 1484 Twin Twelve Amp Case
This case was designed for the Silvertone 1484 Twin Twelve guitar amp, the case accommodates the speaker cabinet with the amp head stored inside. The exterior case is built out of 1/4" plywood and is laminated with forest green ABS plastic. The case features 2 recessed handles and rides on 3.5" casters (2 locking + 2 non) with a full 3/4" Birch caster pad.
Fender Hot Rod DeVille 212 Case
This case was designed for a Fender Hot Rod Deville 212 amp. The case is built out of 3/8" plywood and features a 1" foam lined interior, deep recessed handles and 3.5" Colson casters.
Fender Acoustasonic Junior DSP Amp Case
This case was made for the Salvation Army Band. This Surface Hardware series case is built from 1/4" plywood and features a 1" foam lined interior and 3.5" Colson casters.
3 Capacity Mesa 5:25 Express Head Live In Road Case
This case was built for the touring production of Shrek the musical. The case is designed to hold 3 Mesa Engineering 5:25 heads in a "live in" configuration. Each head is held in a custom foam lined compartment, supported by a 3/4" Baltic Birch divider.