Cable Trunks - Super Duty
Black Magic URSA Broadcast G2 Camera Chain Case
This case was designed to hold a complete camera chain based around a Black Magic URSA Broadcast G2 camera with an attached Fuginon lens. The equipment list includes a Sachtler tripod, with attached camera head and removable dolly. Also included is the URSA Studio Viewfinder in a separate compartment. The focus cable is held in the removable tray via custom notches in the divider network. This allows the cable to remain in a specific compartment to prevent damage. The focus and zoom controllers are held in individual compartments in the removable tray.
Super Duty Cable Trunk 48” x 24”
This case was built for Darmah LLC. The case is built out of 3/4" Baltic birch plywood and finished with black texture coating. All hardware is black powder coated and routed into the plywood creating a "double recess" for a flat pack exterior. The trunk features 4" x 2" Colson casters with a double thick 1.5" plywood bottom for extra support. The trunk interior features a removable divider with a handle routed in for easy removal. The exterior features the 2 color Darmah logo silkscreen.
Oxygen Event Works Audio Adapter Trunk
This case was built for Oxygen Event Works as a way to carry miscellaneous parts and adapters for audio systems. The trunk features 2 removable trays for adapters and removable dividers in the main compartment for segregating cable and other items. The case and trays are made from high quality Baltic Birch and finished in gray texture coating.
Volt Lites FOH Workbox
This case was designed as a personal workbox for Harrison Lippman at Volt Lites. The case is designed to sit perpendicular to a lighting console on the left hand side. The workbox is split into 2 sections: the right section holds support items like monitors and cables for the lighting console, once the console is set up the case can be rolled next to it. The left side of the case has storage for Harrison's backpack as well as a drawer for file storage. The split lid design allows the access to daily items like his back pack and files with out interfering with the deeper side next to the console.
Third Pack Fly Loom Case
This case was designed to hold custom fly loom cables for line array speaker hangs. The cables can be pulled from the case with the lids closed for easier unloading. The case is built out of 3/4" Baltic Birch and features all black powder coated hardware, 4" x 2" Colson casters, rounded cable cut outs and is finished in black texture coating. The exterior dimensions are 30" x 30" allowing you to fit 3 across in a 90" truck.
Heavy Duty Feeder Cable Trunk “Sammy Size”
This trunk is designed to be the backbone of your show, pack your heaviest cables inside and stack gear on top; this trunk is designed to take any abuse you can throw at it. The trunk is built out of 3/4” Baltic Birch that is glued, stapled and screwed together. The case sides feature interior wood cleats for additional strength and the case lid features 3/4” Birch alignment strips to keep the case square even under extreme load. The case features a removable 3/4” Baltic Birch divider that splits the interior in two equal compartments. To add rigidity, the case employs a 1.5” thick bottom and 4” x 2” Colson Encore casters. All hardware is double recessed into the exterior to provide as flat of an exterior surface as possible. The case exterior is finished in black texture coating and features black powder coated hardware to help the case blend in backstage environments.