Moving Heads
Clay Packy Arolla Profile MP 2 Capacity Light Fixture Case
This custom case was built for Mohegan Sun Casino for the Clay Packy Arolla light fixture. The case holds 2 fixtures in custom CNC cut PE foam compartments. Each foam block contours the shape of the fixture. The fixtures ride with their lenses facing down allowing them to be truss mounted in the case. A carpet lined accessory compartment is provided for general storage.
Varilite VL2600 Profile Light Road Case
This custom flight case is designed to hold 2 Varilite VL2600 Profile light fixtures. Each fixture is held in a custom CNC cut, PE foam insert that contours the shape of the light fixture. The usable interior height of the case from the bottom of the insert to the lid foam is 34”.
Chauvet Rogue R1 Beam Wash Road Case
This case is designed for the Chauvet Rogue R1 Beam Wash fixture. 6 lights are held in a custom CNC cut, PE foam insert. The insert allows spacing for clamps to remain attached to each light. The case is built from 3/8” plywood laminated with Hexagrip exterior finish. The exterior features 4 deep recessed handles, stacking caster wells in the lid, and recessed lid stays. The case rides on 4” casters mounted to a full sized ¾” plywood caster board.
Chauvet Maverick Storm 1 Wash Case
This case is designed to hold 2 Chauvet Maverick Storm 1 Wash light fixtures in custom cut PE foam inserts. The case design allows clamps to remain attached to the fixtures for easy deployment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The case rides on 4” casters with a full sized ¾” caster board. The exterior features recessed lid stays to ensure the lid remains open during loading and unloading. 2 deep recessed handles are provided.
Chauvet Rogue R1 Wash Case - 6 Capacity
This case is designed to hold 6 Chauvet Rogue R1 fixtures in a custom CNC cut foam insert. Each fixture is stored lens facing down. The foam securely contours the shape of each fixture allowing safe travel even if the case is flipped. A 5.5” deep x 43.5” wide x 12.5” tall carpet lined accessory compartment is included to hold clamps, power, and safety cables. The case features 4” Colson casters (2 locking), 4 deep recessed handles, stacking caster wells, and recessed lid stays. The case is designed around a 90” truck pack with OD dimensions of 45” x 30”.
Chauvet Intimidator 350 LED - 8 Pack Road Case
This case was designed to hold 8 Chauvet Intimidator 350 LED light fixtures. Each fixture is held in an individual compartment in a CNC cut foam insert. 6” of space is allowed above each fixture base to accommodate clamps mounted to the fixture. 2 removable trays are provided above the fixtures for storage. The case exterior is 48” wide x 24” deep, and rides on 4” Colson casters.
Chauvet Rogue R1 6 Capacity Case
This case was designed to hold 6 Rogue R1 light fixtures in a 96" x 90" truck pack configuration. The case is 48" wide x 30" deep allowing it to be half packed in a 96" truck and third packed in a 90" truck.
GLP Volkslicht 6 Capacity ATA Case
This case was built for Oxygen Lightworks. The case is designed to hold 8 GLP Volkslicht RGB moving fixtures with clamps attached. The fixtures ride in a hanging configuration in a custom CNC cut foam insert. The lights can be placed in the insert in any direction to allow for easy loading and unloading.