Presonus
Presonus StudioLive 32S Series III Console Case
This case is designed to fit the Series III Presonus StudioLive 32S. The case interior is black painted with custom cut Crosslink foam blocks that contour the shape of the console. The case features a custom doghouse which is built from Baltic Birch plywood and finished with black textured coating. The doghouse lid is double hinged allowing easy access to the back of the console.
Portable Marching Band PA System Case
This case was designed for the Palen Music Center to provide an on field PA system control case that can be towed on the field with a Gator, ATV or pickup truck for a marching band's half time show. The case is designed around a Presonus Studiolive 24.4.2 mixer and has 3 shock mounted racks for equipment storage.
Presonus 16.4.2 Roadcase
This case is designed for a Presonus 16.4.2 mixing console. The console is held in a 1" foam lined interior with a 4" accessory compartment behind the console for storage. The front foam is notched to allow easy access to the console's headphone jack. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and has 3 recessed handles.
Presonus Studiolive 24.4.2 Travel Case w/iPad Compartment
This case is designed to be a lightweight carrying case for the Presonus Studiolive 24.4.2 console. The case is built out of 1/4” plywood and features a 1” Ester foam lined interior. The console is held in place by 2 Marine Grade plastic side rails, the case interior also features storage for an iPad in the case lid. The case also features a telescoping aluminum handle and inboard dolly casters, both the handle and wheels are field replaceable with a phillips screwdriver.
Presonus 24.4.2. Audio Flypack Workstation
This case was built for Creative Live as the audio portion of a portable audio & video mobile rig, CLICK HERE to see the matching video case. The case features a rack mount section for the Presonus StudioLive 24.4.2 with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.
Waterproof Case For Presonus 16.0.2. Mixer
This case was designed for the Presonus 16.0.2. mixer. The design is based around the Storm iM2720 waterproof case and features a custom CNC cut foam insert. The mixer slides into the insert by placing the arm rest in first. The foam insert holds the mixer from the top as well as the sides to provide maximum protection for your mixer. Under the mixer is a combination storage compartment that contours your iPad, below the iPad compartment is additional storage for cables. The iPad compartment is designed around an iPad in an Otterbox to accommodate most all aftermarket iPad cases.
The storm case features dolly casters and an extendable handle for easy transport.
Presonus 16.0.2. Mixer Roadcase
This case was designed for the Presonus 16.0.2. mixer. The case is built out of 1/4″ plywood and features a telescoping aluminum handle and inboard dolly casters. There is a storage compartment under the board for storage that is large enough to fit an iPad.
Presonus 16.0.2. Case – LM XL Series
This case is designed for the Presonus 16.0.2. mixing console. The case is part of our XL Series line of cases, these cases feature a custom aluminum extrusion wrapped around a 1/4″ piece of plywood. The aluminum extrusion utilizes an interlocking tongue and groove to allow for strong lid and base alignment. The aluminum and plywood panel combination results in a strong, lightweight and inexpensive case.
The mixer is surrounded by 1″ foam and has a 2″ deep accessory compartment below the mixer. The exterior case is equipped with 2 surface mounted twist latches and 3 surface mounted spring loaded handles. Any of our standard colors are available at no additional charge.
Presonus StudioLive 16.4.2 w/Integrated iPad Doghouse
This case is designed to hold the Presonus StudioLive 16.4.2. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam piece to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
Presonus Studiolive 24 With iPad Integrated Doghouse
This case is designed to hold the Presonus StudioLive 24. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam pieces (see picture below) to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
Presonus 16.0.2 Case
This case is designed for the Presonus Studiolive 16.0.2 mixer. The case is built out of 1/4" plywood to keep it lightweight and manageable. The case interior features a 1" foam lined interior with strategic foam blocking to keep the mixer in place during transportation. There is a foam slot under the mixer for cable storage.
Presonus 24.4.2 Case With Doghouse
This case was designed for a Presonus Studiolive 24. The case features a 1" foam lined interior and a custom 3/4" Birch doghouse that contours the back of the board. The exterior case is made out of 1/4" plywood and features 5 recessed handles.
Presonus Studio Live 24.4.2 Case
This case is designed for the Presonus StudioLive 24.4.2. The case interior is lined with 1" foam and is designed to allow easy access to the i/o section of the board as well as the front headphone jack. The exterior case is built out of 3/8" plywood and features a pull off latched lid and 3 handles.
Presonus StudioLive 24.4.2 Mixer Case With Casters
This case was designed and built for Avex Inc. The case features a 2" foam lined interior, and custom foam blocking to keep the mixer in place during transportation. The case is built out of 3/8" plywood laminated with red ABS plastic. The exterior of the case features a custom silkscreen of the customer's logo, 7 handles, and 3.5" Colson casters.
Presonus StudioLive 24.4.2 Case w/Tilt N’ Travel Option
This case is designed for the Presonus Studiolive 24.4.2 digital mixer. The case is built out of 1/4" plywood and features recessed hardware in addition to a telescoping aluminum handle and 3" inboard dolly casters. The case also features an accessory compartment behind the mixer for storage of peripherals such as cables, littlelites etc..