Camera Cases
Blackmagic Design URSA Mini Pro w/Fujinon Lens & Viewfinder Camera Chain Case
This custom case built by LM Cases is designed to hold a Black Magic URSA Mini Pro 4.6K G2 Camera Chain. The custom CNC cut foam insert holds a Black Magic Cinema camera body with Fujinon lens attached in addition to a Black Magic URSA Studio Viewfinder. An accessory compartment is provided for additional storage. The custom insert is mounted in a SKB iSeries Case.
Modular Generic RCP Case - 4 Capacity
This case is designed to hold remote control panel style camera controllers for National Micro Rentals. The case features a removable inner caddy allowing it to operate outside of its exterior road case. The caddy features a slidable top panel allowing a variety of RCP sizes to be used.
Black Magic URSA Broadcast G2 Camera Chain Case
This case was designed to hold a complete camera chain based around a Black Magic URSA Broadcast G2 camera with an attached Fuginon lens. The equipment list includes a Sachtler tripod, with attached camera head and removable dolly. Also included is the URSA Studio Viewfinder in a separate compartment. The focus cable is held in the removable tray via custom notches in the divider network. This allows the cable to remain in a specific compartment to prevent damage. The focus and zoom controllers are held in individual compartments in the removable tray.
Univ. Of Texas Stadium Camera Trunk w/Tablet Charging
This trunk was designed for the University Of Texas to hold cameras, tripods and tablets.
Vinten Vector 750 Pan/Tilt Head Road Case
This case is designed to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut, PE foam insert that is designed to contour and support the unit. The case is designed with broadcast truck packs in mind; ½” marine grade plastic is positioned at all high stress internal points allowing the case to be flipped. The foam insert includes 1.625”, and 1.125” diameter holes for arms.
Panasonic AW UE150 PTZ Camera Case
This case is designed to hold a Panasonic AW UE150 PTZ camera. Custom foam blocking is mounted in a way to support the camera head during transport. A accessory compartment is provided for additional storage. The exterior case is built from ¼” plywood laminated with your choice of ABS plastic colors.
Nikon D810 Camera System Pelican 1510 Case
This case was built for Elevate Life Church to hold a Nikon D810 camera body and lens kit.
Sony Camera Chain Case
This case was designed for AVI-SPL to hold a Sony camera system. The case holds all camera components for rental applications including the camera body, preview monitor, lenses, camera control unit, cable reel and Telex com head set.
Sony RCP1500 Sliding Rack Mount Fly Pack Shelf
This sliding shelf is designed to hold 3 Sony RCP1500 camera controllers in a rack mount format. The shelf features a multi-position locking latch system that allows the shelf to be extended and locked into 14 positions of extension by pulling the front T handle. The shelf also features a padded palm rest at the front below the controllers. The shelf requires mounting to the front and rear rack rails of a rack case. The minimum rail to rail depth is 20”.
Miami Dolphins Projector/Document Camera Workstation
This case was designed for the Miami Dolphins to display video and photos for team presentations. The case features a projector, and a document camera attached to a top work surface. The system is designed with quick setup and tear down in mind. All components are permanently wired allowing the user to simply remove the case lids and plug the system into a power source.
Vinten Vector 750 Pan Head Case
This case was designed for NEP to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut foam insert. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features a custom silkscreen of the NEP logo.
NHK Camera Tripod Head Case
This case was designed for NHK America to hold a camera tripod head. The head is held in a custom CNC cut foam insert with a removable marine grade plastic divider that allows for storage of 2 control arms and an extension arm on top of the head.
NHK America Canon Digi-Super 100 Camera Lens Case
This case was designed for NHK America to hold their Canon Digi Super 100 lens. The case features a custom foam lined compartment for the lens and a separate compartment for the zoom and focus controls.
Portable DIT Monitor Rack Case
This case was built for the Farm League to provide a monitor and controller storage front end to their portable digital image transfer work station. The rack holds a Black Magic 17" Smartview HD monitor on a tilting rack frame allowing multiple view angles. Below the 17" monitor is a Black Magic Smartview Duo dual rack mount preview monitor. A slide out drawer was used to hold a Tangent Element controller. The controller is held in place via custom CNC cut plastic brackets that contour the units shape and secure it allowing the the rack to be tipped and rolled while the controller remains securely mounted. A custom power distribution box built by the LM Cases Custom Integration department is included for split UPS power between this case and its computer case. The power distribution box takes incoming power, routes it to the UPS (not pictured) via Powercon then distributed the UPS secure power to the computer rack. The UPS includes courtesy outlets and breakers. The rack is built out of 1/2" Baltic Birch finished with black texture coating, the rack also features black recessed handles.
Portable Photo Booth System
This system was designed for Wenning Entertainment as a complete modular photo booth system. The system is compromised of 2 parts: a top case that holds the camera, lights and computer; and a bottom accessory case that holds the printer, paper, extension cords and replacement ink.