Guitar Equipment
Road Case For Benson Vinny / Benson Nathan Junior Amp
This custom rolling road case is designed specifically for the Benson Vinny and Nathan Junior combo amplifiers. Built from lightweight ¼” plywood with durable ABS laminate, it features 1.5” PE foam lining and a precision-cut foam support block with an accessory compartment beneath the amp. Recessed hardware and locking 3.5” casters make it tour-ready while allowing the amp to remain in the tray during performance or elevate on the lid for better stage projection.
Benson Monarch Reverb Amplifier Case w/Custom Stencil, Silkscreen & Pink Color
This custom road case by LM Cases is built to protect and transport a Benson Monarch Reverb guitar amplifier. The case features a foam-lined interior with added shock protection, a dedicated accessory compartment, and precise foam cutouts to secure the amp and handle. Constructed from durable plywood with ABS laminate, the case includes stacking caster wells, locking casters, and custom exterior branding for reliable touring use.
Dr. Z Z80 2x12 Cabinet Road Case
This custom case built by LM Cases for the Steve Miller Band and designed for the Dr. Z Z80 2x12 speaker cabinet. The case features a pull over lid with the cabinet living in the case’s tray. The interior is lined with 1” PE foam with 2” PE foam under the cabinet. The 2” bottom foam block features cut outs in the corners allowing the rubber feet to “float”.
Compact Guitar Tech Case For Fly Dates
LM Cases, LM Cases guitar tech workbox, guitar technician workstation case, portable guitar repair workstation, touring guitar tech tool case, guitar maintenance workbox, guitar setup workstation case, rolling guitar tech case, fly date guitar technician case, guitar repair tool storage case, musician tech workbox, touring instrument technician case, portable guitar service workstation, waterproof guitar tech case, guitar tech travel workstation, professional guitar technician equipment case, SKB guitar tech workstation case, custom guitar repair case, LM Cases custom musician tech case.
Dr. Z Z80 Guitar Amp Head Road Case
This custom flight case was built for Steve Miller to protect and transport a Dr. Z Z80 amplifier head.
The interior is lined with 1” PE foam for cushioning and includes a built-in accessory compartment beneath the amplifier for storing small items.
The exterior is constructed from ABS-laminated plywood and features recessed handles, lid stays, and a custom “SMB – Z80” stencil, providing durable protection for touring and transport.
Amplified Nation OverDrive Reverb Guitar Amp Case
This custom amplifier case was built for Lake Baum to transport an Amplified Nation Overdrive Reverb amplifier and 1×12 cabinet.
The interior features velvet-wrapped foam blocks and custom supports that secure both the amp head and cabinet while protecting delicate finishes. A marine-grade plastic buffer plate separates the head from the cabinet, with routed recesses to hold their feet in place.
The four-piece case design allows it to function as either a “live-in” case—where the amp can be used while partially enclosed for protection—or as a full pull-over case where all lids are removed to fully expose the rig.
Constructed from ABS-laminated plywood, the case includes interchangeable lids, protective runners, multiple handles, and locking casters, providing durable protection and flexible stage use for touring gear.
Dr. Z X-Ray Combo Amp Road Case
This custom case is designed for the Steve Miller for his Dr Z X-Ray Combo guitar amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Custom Road Case For Gibson SG Guitar
This custom flight case is designed to fit a Gibson SG electric guitar. The case is constructed from our XL Series aluminum. This aluminum features tongue and groove built into the extruded shape for a very tight, and secure seal between the lid and the tray. The case interior is custom cut from Ester foam and contours the shape of the guitar body. Crucial stress points of the guitar are supported with additional foam blocks. All interior foam is wrapped with purple crushed velvet. A custom accessory compartment with a hinged door is provided for additional storage.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Fender Pro Sonic Amp Case
This case was designed for Elevate Life Church to hold their Fender Pro Sonic combo amp. The case has a 1" PE foam lined interior with a 2" PE foam bottom under the amp. The exterior case is built out of 3/8" plywood laminated with black ABS plastic and features deep recessed handles, and 4" Colson casters.
Custom Fender Stratocaster Case
This case is designed to your cradle your Fender Stratocaster in a custom CNC cut Ester foam insert that supports the guitar at its varying heights. The foam insert is designed to hold all models of Strat with all head stocks and body contours. The Ester foam insert is hand wrapped with black crushed velvet to ensure the most delicate touch to your instrument. The exterior case is built out out 1/4” plywood to ensure that the case is a light as possible. This case is designed to allow your guitar to be checked on commercial airlines and provide you piece of mind that your instrument will be safe; no matter how rough the handling.
Vox AC15 Amp Case
This case is designed for the Vox AC15 combo amp. The amp is held in a 1” Ester foam lined interior with a 2” PE foam bottom under the amp. The exterior case is built out of 3/8” plywood and features 4 latches, 2 deep recessed handles and 4” Colson casters with a full 3/4” Birch caster pad.
1930 National Lap Steel Case
This case was designed for a 1930 National Lap Steel guitar. The case features a custom CNC cut foam interior that contours the shape of the lap steel covered with black crushed velvet. The exterior case is built from our XL series light weight aluminum.
1959 Fender Bassman Road Case
This case was designed for the backline department of Mohegan Sun casino. All of the combo amp cases for the casino are designed to be the same size allowing them to easily stack in the limited storage space of their arena.