Projector Lenses
Panasonic ET-D3LEU100 Short Throw Lens Case
This case is designed for Panavid to hold a Panasonic ET-D3LEU100 projector lens. The case features a custom CNC cut foam interior. The lens is held by cradles built from non-abrasive Crosslink foam. The Crosslink foam allows the lens to be transported without caps if desired. The center section of the case is finished with black carpet.
Panasonic ET-D3LET80 Projector Lens Case
This case was built for Panavid to hold a Panasonic ET-D3LET80 projector lens. The case features a custom CNC cut foam interior. The lens is held by cradles built from non-abrasive Crosslink foam. The Crosslink foam allows the lens to be transported without caps if desired. The center section of the case is finished with black carpet.
Barco TLD .4:1 90 Degree Lens Flight Case
This case is designed for the Barco TLD .4:1 90-degree projector lens. The lens is held in custom CNC cut crosslink foam cradles. The lens is supported at all stress points. The nonabrasive foam prevents scratching and allows the lens to be transported without its lens caps attached.
Panasonic ET-D75LE10 Projector Lens Case
This custom SKB iSeries case is designed to hold the Panasonic ET-D75LE10 projector lens. The case features a custom CNC cut foam insert built from crosslink foam. Crosslink foam is nonabrasive, allowing the lens to be transported without its caps attached.
Panasonic ET-DLE170 Projector Lens Case
This custom SKB iSeries case is designed to hold the Panasonic ET-DLE170 projector lens. The case features a custom CNC cut foam insert built from crosslink foam. Crosslink foam is nonabrasive, allowing the lens to be transported without its caps attached.
Barco TLD+ 7.5-11 R9829997 Projector Lens Case
This case is designed to hold a Barco TLD+ 7.5-11 (R9829997) projector lens. The case features custom PE foam cradles that hold the lens at each end. Crosslink foam is provided at the glass ends of the lens. The non-abrasive Crosslink foam removes the need to provide caps with the lens. The case exterior is built from ¼” plywood laminated with charcoal ABS plastic and features Panavid’s silkscreen and ID stencils to show the lens make and model. The case features flat triangle corners allowing it to be placed in a cardboard box easily for shipment.
Christie 1.5-2.00 Zoom Lens Case
This case was designed for SmartSource Rentals to hold a Christie 1.5-2.00 zoom lens. The lens is held in a custom CNC cut foam compartment. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features 1 recessed handles.
Panasonic W03E Lens Case
This case was designed for Panavid to hold a Panasonic W03E lens. The lens is held in a custom CNC cut foam compartment that cradles all planes of the unit, the ends of the foam compartment are finished with Crosslink foam allowing the lens to be stored without caps.
Eiki 1.29-1.80 Projector Lens Case
This case was built for Wagner Media to hold their Eiki1.29-1.80 projector lens. The lens is held in a custom foam lined compartment that supports it from varying heights allowing all surfaces to be equally contoured. The foam compartment features crosslink foam pieces at both ends which allows the lens to be shipped without caps. Crosslink foam features a Class A scratch resistant surface which wont scratch the delicate glass of the lens.
Panavid Chooses LM Cases For Custom Projector & Lens Case
The case was designed for Panavid Inc to accommodate a variety of projectors and lenses for rental applications. A unique challenge with any rental house is how to transport a projector with the correct lens for each unique job. Because Panavid rents the lenses separately from the projector, simply storing the lens in the projector case was not an option; separate lens cases needed to be created.
Christie 1.5-2.0SX 1.4-1.8HD Lens Case
This case was built for Tekamaki. The case is designed to hold the Christie 1.5-2.0SX 1.4-1.8HD lens for separate shipment with their Christie HD 10KM projector. The case features a custom CNC cut foam interior to perfectly contour the lens.
Eiki LC-X80 Lens Case - Pelican 1510
This case was designed for Wagner Media. The case is designed to hold a Eiki LC-X80 projector lens. The case features a CNC cut insert installed into a Pelican 1510 case. The insert is cut out of ester foam and capped with crosslink foam which allows the lens to be placed in the insert with out lens caps and not scratch the glass.