Midas
Midas Heritage 2000 Channel Strip Transport Case
This case was designed to carry 4 Midas Heritage 2000 channel cards. The case is designed to hold spare channels on the road and or ship channels out for repair via UPS/FEDEX when needed. The case is lined with 1” anti-static PE foam. A center foam divider keeps the channel cards separated back to front. 2 removable 1” pieces keep the channels separated top to bottom. Each channel is held in a way to prevent the knobs (and therefore the potentiometers) from contacting the foam during transport. The exposed twisted wire loom on the bottom of each channel is also accommodated in the insert so it doesn’t come in contact with the foam.
3 Piece Tour Grade Case For Midas M32R With Doghouse
This is a custom tour grade shipping case designed for the Midas M32R console. The case is a 3-piece design allowing for full access to the front of the console by removing the top and front lids. The console is held in place against the doghouse buy its feet via routed holes in a ½” Baltic Birch board under the console. The doghouse is built from ¾” Baltic Birch, and features black textured coating, and a top lid that folds out of the way during patching.
Light Weight Road Case For Midas M32R Console
This is a custom, light weight case for the Midas M32R console. The console is protected by 1” Ester foam on all sides. Custom blocking is positioned at the palm rest and rear of the console to ensure proper protection when the case is flipped at any angle. An accessory compartment is provided under the console for additional storage.
Midas M32R 3 Piece Lid Mixing Console Case
This case is designed to hold a Midas M32R mixing console. The three piece design allows the console to be used in the case bottom tray with the top, and nose lids being removable. The exterior features 8 deep recessed handles. A handle is located in the case caster pad to help move it when on a table top or EZ Tilt. The case exterior is built from 3/8” plywood laminated with your choice of ABS laminate color. The case rides on 4” Colson casters and features a full ¾” thick birch wheel pad.
Midas M32R Venue Install Mixer Case
As part of an installed sound system, our client had the unique need to store and protect the venue's Midas M32R while leaving it wired into the system. Because of limitations at the venue, the console could only be placed on a ledge that was not deep enough to accommodate it. The solution was to build a case that could be secured to the ledge at the rear and hang off at the front. To accomplish this, a set of table legs were cut to allow the case to use the rear ledge as a support and safely support the front weight via the legs.
Midas F16 Console Case With Companion Rack
This kit was designed for Hunter Productions as a mobile audio/video system for covering Nascar events. The top case holds a Midas F16 mixer and features a custom doghouse and articulating laptop arm. The laptop arm is mounted inside the doghouse and protrudes through the top lid. The doghouse lid can be opened independently of the laptop mount and both can be used simultaneously. The Midas F16 case features a 4RU rack section and is latched onto the bottom rack.
Custom Midas M32 Case
This case was designed for Image Of God Ministries for a Midas M32 console. The case is a 3 piece design that features a removable front and top lid in addition to a doghouse for cable management.
Midas Venice F16R Case
This case is designed for the rackmounted version (F16R) of the Midas Venice F16 mixing console. The case features angled foam blocks that contour the rack ears of the console and trap it in the case without touching the knobs or faders. The case tray features plastic strips the prevent the feet from sinking into the foam. The exterior case is built out of 1/4" plywood (thicker plywood is available on request) to keep it as lightweight as possible. The console can be used in the case tray.