Power / Signal Rack Mount Products
Projection System True1® / Signal Rack Mount IO Panel
This custom rack mount panel was designed as the main power/signal source for a projection system. The panel is built from .125” black anodized brushed aluminum. Power is brought in via a Neutrik NAC3PX-TOP True1® combination jack. This jack has an inlet and outlet in the same chassis. The outlet is a convenient way to link multiple systems together or provide courtesy power via a 4-plex or pendant aux power cable. A fully enclosed back box isolates internal wiring. 2 snap in, spaced, AC outlets are mounted on the rear of the back box to provide outlets for the system.
L5-15 Locking Power I/O Panel w/Fiber Jack
This panel was designed to be the main power and I/O point for a workstation using a Midas Pro 2 console. Power is brought in to the system via a Hubbell HBL4716C flanged inlet wired to two duplex outlets on the back. The panel features punches for a Neutrik NO4FDW-A quad fiber connector, 2 Neutrik NE8FDX-P6 connectors and 2 blanks for future expansion.
1RU NAC3PX-TOP Power Panel w/Courtesy Outlet & 4 Blank D-Punches
This custom 1RU panel is designed to be a central input source for your rack. Power is brought in through a Neutrik NAC3PX-TOP combo inlet. It is then fed to a front mounted courtesy duplex outlet, a True1 outlet, and a rear mounted tail terminated with a Lex receptacle. 4 blank d-punches are included for any additional connectors to cover basic system i/o. Don't forget to pair a LM Tour Systems True1 power cable!
Half Rack Width Quad Fiber / Powercon / Cat 6 IO Panel
This custom half rack width IO panel was built for Disney to provide external connectivity to an audio rack.
3RU Heater Control Rack Mount Panel
This panel is designed to be the master control center for a football heater case. The panel is 3RU tall and built from .125” brushed aluminum. The system has 2 temperature zones controlled by 2 thermostats. Each thermostat is back mounted to the panel via a custom bracket designed to fit into the thermostats DIN rail mount brackets. Standoff’s are provided to firmly mount and secure each thermostat’s temperature probe wire.
2RU L5-20 Power Inlet Rack Mount Panel w/WAN Port
This panel is designed to be a main power and signal input point for mobile server racks. The panel features a HBL2315 inlet wired to a HBL2316 outlet. The power portion of the panel is enclosed in a back box. The HBL2316 outlet allows users to connect a UPS without the need for hard wiring. A blank D-Punch is provided allowing users to mount the connector of their choice. 2 additional D-Punches are provided for future expansion. The panel is built out of .125” black anodized brushed aluminum and occupies 2 rack units. The LM Tour Systems L5-20 Twist Lock HD 12/3 Power Cable is designed to compliment this panel.
2RU Half Rack Width Thunderbolt & USB Desktop IO Panel
This panel is designed to provide USB A, C, Thunderbolt and AC power connections for work surfaces in a half rack format. The panel includes 2 – panel mounted USB 3.0 A-A jacks with 6ft tails and 2 – panel mounted USB C A-A jacks with 3ft tails. A 6ft Thunderbolt cable (USB C Ends) is mounted through a strain relief compression fitting. The compression fitting allows the cable to be fed in and out of the panel without damaging the fragile cable. A duplex outlet with 2 USB A jacks is provided for courtesy power. The duplex outlet is fully enclosed with a back box. A 6ft HD power cable with a standard Edison plug is provided to provide power to the panel. The panel is 3.5” (2RU) tall, 10.5” wide, and requires 7” of depth to accommodate the cable bundle.
2RU Mobile Entertainment Center Control Rack Panel
This 2RU rack mount panel was designed to be the control center of a mobile entertainment system. The panel is built from .125” thick black anodized aluminum with all labels being laser etched. Featured are a Siemens 30mm push button and indicator light. The push button initiates the power sequencer to power up/down all the components of the case. The indicator light is the last element in the power chain; once the sequence has completed the light illuminates. Also featured is a waterproof HD up/down switch that controls an electric lift that a monitor is mounted on. Centered in the panel is a Leviton courtesy outlet that features Edison outlets and 2 USB outlets. 5 USB outlets are provided for device charging. Male XLR jacks are provides for a main output of the system to an additional set of speakers. Input signals are handled through Datapro brand panel mount HDMI, 3.5mm audio jack and a USB 3.0 jack. All Datapro input jacks feature recessed milling on the rear of the panel.
2RU L6-30 Server Rack Power Input Panel
This panel was built for Nvidia as a main power input for a portable server rack. The panel acts as a main input source for the server rack, all in/out connections are addressed at this panel. The panel features a L6-30 208v power input inlet with a 30 amp hydraulic breaker in line, wired to an L6-30 outlet on the rear of the panel. All power is enclosed in a back box mounted to the panel flanges. The panel also features 8 – Neutrik NE8FDP-B Cat 5 jacks.
The panel is built from .125” thick brushed aluminum that is black anodized. All labels and logos are laser etched.
1RU Shure ULX-D 2ch Wireless System IO Panel
This panel is designed to compliment a 2 channel Shure ULX-D wireless system. The panel allows for centralized access of the 2 audio outputs, 2 antenna inputs and link outputs and the Primary and Secondary Dante network ports. The panel is designed to power the receiver(s) and or a network switch from the rear Edison outlets and a Shure battery charger from the front outlets. The panel is 1RU in height and features 2 captive 10/32" screws to allow quick removal of the panel without tools.
Power Input / Ethernet 2RU Rack Panel
This panel was built for the University Of Nebraska as a power and signal input for a portable server rack. The panel features a Neutrik Powercon input wired directly to a Hubbell duplex outlet enclosed in a back box. The panel also features a Neutrik NE8FDP-B ethernet jack to provide a WAN input. The panel is built out of .125" thick brushed aluminum that black anodized and features white laser etched labels and the Nebraska "N" logo.