Stationary Lights
Arri S120C Skypanel Case
This case is designed to hold 2 Arri S120C Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Arri S30C Skypanel Roadcase
This case is designed to hold 2 Arri S30 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Chauvet Color Strike Road Case - 6 Capacity
This custom road case is designed to hold 6 Chauvet Color Strike lights. Each fixture is held in a custom CNC cut foam compartment. A large 46.5” x 6.75” x 16.125” carpet lined accessory compartment is provided for misc items.
Arri S60 Skypanel Case - 2 Capacity
This case is designed to hold 2 Arri S60 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Elation FuzePar z120 Light Fixture Case - 6 Capacity
This case is designed to hold 6 Elation FuzePar z120 light fixtures. The case interior is carpet lined with 1” PE foam under each light fixture. The lights are separated via a ½” black marine grade plastic divider network. 2 removable carpet lined trays are provided for accessory storage.
Elation Level Par Q7 Light Case - 6 Capacity
This case is designed to hold 6 Elation Level Par Q7 light fixtures. The case interior holds each fixture in a custom PE foam lined compartment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The exterior features 4 deep recessed handles, 4” Colson casters, stacking caster wells and recessed lid stays.
Chauvet ColoRado Solo Batten Road Case - 3 Capacity
This case is designed to hold 3 Chauvet ColorRado Solo Batten fixtures. Each fixture is held in a custom PE foam lined compartment. A carpet lined accessory compartment is provided for misc storage. The case exterior is built from ½” plywood laminated with your choice of ABS colors. The hardware set features 4 deep recessed handles and stacking caster wells in the lid. Recessed lid stays are provided. The case rides on Colson 4” x 2” HD casters mounted through a full sized ¾” caster board.
Aputure Nova P300C 2 Capacity Road Case
This is case is designed to hold 2 Aputure Nova P300C light fixtures. The custom cut PE foam insert holds both fixtures in separate compartments with their fly yokes attached. There is enough space within the case to allow mounting clamps to remain attached to the yokes. A separate compartment is provided for the unit’s soft box diffusers to be stored in their factory bags. A removable tray is provided for accessory storage. This tray also features a custom foam insert for the extendable control box.
Elation CW Profile HP Ellipsoidal Light Fixture Road Case - 6 Capacity
This case was built for Nvidia. The case is designed to hold 6 Elation CW Profile light fixtures with their clamps attached. Each light compartment features usable dimensions of 10.875” wide x 10.875” deep x 31.75” tall. The lights are held in individual compartments created by a ½” marine grade plastic divider network. 2” Ester foam laminated with .125” thick white HDPE is positioned under each light to provide shock protection for each light. The foam/HDPE combo is soft enough to not damage the gel frame holders. A carpet lined accessory compartment is provided for additional storage.
Chroma Q Color Force 72 Case
This case was built for e33 Productions at MIT University. The case holds 3 ColorForce 72 fixtures in custom CNC cut foam cradles built out of Crosslink foam. The case also features a carpet lined accessory compartment for clamps and cables. The exterior case is built out of 3/8" plywood laminated with black ABS plastic and features 4" Colson casters, stacking caster wells in the lid, recessed lid stay's, and a recessed PAL label dish in the lid.
8 Capacity Leko Light Case
This case was designed for Volt Lights to hold 8 Leko light fixtures with clamps attached. The exterior cases dimensions are based around a 96” truck pack. The case features an all 1/2” Marine Grade plastic divider network. The lights ride on a 2” PE foam block with a 1/4” Marine Grade plastic board laminated on top to prevent the end of the light from digging into the foam. The exterior case is built out of 3/8” plywood and features, stacking caster wells, 4” Colson casters, 8 deep recessed handles and a route out for a PAL label in the lid.
ETC Source Four Ellipsoidal Case - 4 Capacity
This case was designed for Panavid to hold 4 ETC Source Four fixtures with clamps attached. The case features a hinged top and dual opening front lids allowing the fixtures to only be lifted a few inches to be loaded and unloaded from the case. Each fixture is held in a separate carpet lined compartment with a 2" PE foam bottom. A piece of 1/4" Marine Grade plastic is laminated to the PE foam of each compartment which prevents the fixtures from damaging the foam. The lids feature deep compartments for the storage of Powercon and DMX cables.
Volt Lites Altman 155 Scoop Light Case
This case was designed for Volt Lites to hold 4 Altman 155 18" Scoop Lights.
Lycian Super Arc 400 Follow Spot Case
This case was made for Forty Two Inc for a Lycian Super Arc 400 follow spot. The fixture is held in a custom foam lined interior that accomodates all protrusions and levers. The exterior case is built out of 3/8" plywood and features stacking casters cups and 3.5" casters.
8 Capacity Elation Design Brick 70 ATA Case
This case was built for the Audio Visual Professional Group to hold 8 Elation Design Brick 70 light fixtures. The case holds each fixture in a 1" PE foam lined compartment with 2" of PE foam under each unit. The case interior also features a large accessory compartment for cables.