Display & Exhibit Cases
Modular Dance Costume Display Case For Trade Shows
This case was built for Discount Dance Supply for use at trade shows and conventions. The case is designed to be fully configurable allowing flexibility and scalability to handle a diverse selection of shows.
Square Register Portable Point Of Sale Work Station
This custom touring merchandise case was built for the Bubble Group. The fully integrated case is built around a Square Register point of sale system that includes a cash drawer, receipt printer, and a Dell Ultrasharp 32” monitor.
Lumacurve Airfield Sign Sales Demo Transport Case
This case was designed for Standard Sign as a portable transport solution for Lumacurve signs used in demonstrations at customer sites, and trade shows.
Acrylic Podium Lectern Case
This case is designed to hold most acrylic lecterns. The case features 1” crosslink foam orientated toward the top and the bottom of the case to cushion the lectern at the base and at the speaking materials shelf. The foam supporting the lectern at its base features a piece of .125” laminated HDPE plastic to prevent foam tearing and spread the weight. The usable interior dimensions of the case are 27.5" wide x 16.5" deep x 47.5" tall. The case exterior is built out of 3/8” plywood laminated with your choice of ABS plastic colors, and it features four deep recessed handles. The case rides on 4 – 3.5” casters (two locking) that are mounted to a full 3/4” caster board.
Boeing Monitor Stand Transport Case
This case was designed for Boeing as a portable container to transport a monitor array stand to trade shows. The custom stand that the case transports holds 6 monitors in an array to provide video content for flight simulators. The case is design to be a very simple design allowing the stand cart to be rolled into position, and locked into place.
Lawo Modular Rack Display Case
This case system was designed for the Lawo Group as a modular approach to transport and display their equipment for trade shows. The system is designed around 3RU rack shells, and a storage box that is 3RU in height that stack together allowing for multiple confirguations. The concept allows the racks to remain stacked and locked together in the outer case tray, this expedited the set up and tear down of Lawo's booth.
Clear Acrylic Lectern Road Case
This case was built for Oxygen Event Works for their 1/2" Clear Acrylic lectern. The lectern is held in a custom non-abrasive Crosslink foam lined compartment that features a 1/2" marine grade plastic bottom for easy loading and unloading.
Sally Beauty Ion Brilliance Trade Show Workbox
This workbox was designed for Sally Beauty Supply to be used as a display case for their Ion Brilliance products at trade shows. The case features 6 utility drawers for storage: each drawer is built out of 1/2" Baltic Birch plywood and is individually lockable with a key. The drawers are mounted on heavy duty Accuride drawer glides and are mounted inside of a frame that isolates the drawers from the exterior case. The left half of the case features 2 hanging bars for samples.
Scenic Panel Frame Case
This case was designed to hold scenic display panel frames for use at trade shows. Each case holds 10 panel frames in custom angled wood slots wrapped in black Ozite. The slots keep the frames separated to ensure safe transport as well as allowing the user to select a single frame with out the need to remove the entire stack.
FOH Chair Case
This case was built for Volt Lites. The case is designed to store the rolling chair and support items used during shows. The chair compartment is lined with 1" PE foam covered with white HDPE plastic to allow the chair to slide in and out without damaging the foam. Below the chair compartment is a large drawer mounted on HD Accuride glides. There is also a storage compartment in the lid to hold a table.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
Topcon Medical Slit Lamp Case
This case was designed for Topcon Medical to transport their delicate Slit Lamps to trade shows. The case features multiple compartments for various sizes of the companies models. Each compartment is foam lined to match a particular unit and its accessories. The two halves of the case are divided by a foam lined hinged door keeping the contents in each compartment during transportation
Boeing F18 Flight Simulator Case
This case was designed to hold the forward portion of a Boeing F18 flight simulator for use during trade shows. The case features a 2" PE foam lined interior wrapped in black carpet to allow for shock absorption and durability.
Faxitron Bioptics Transport Case
This case was built for Faxitron Bioptics. The case is designed to carry delicate pieces of medical equipment from Faxitron to final locations at hospitals, labs, and doctors offices. The case is designed to be simple to use as well as very durable to withstand un-palletized LTL shipment.
LM Cases “Pimp” FOH Chairs
When a standard chair wont do....its time for the ultimate fly maneuver: LM Cases Pimp Chairs. These chairs are built out of 3/8" plywood laminated with black leather and outfitted with white shag that is enough to bring a tear to Shaft's eye...and that aint no jive!