Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 19-0396
Shure UA870WB Wireless Paddle Antenna Case
This design accommodates 2 Shure UA870WB short wave antennas in a custom CNC cut foam insert. The case also features a 1RU rack to hold an antenna combiner. A hard mounted hinged flap is included to hold the antennas in their compartment and prevent them from contacting the rack bottom during transport. The foam insert and rack are mounted in a Pelican 1600 case.
To purchase this case from our online store, CLICK HERE.
- REFERENCE: 19-0396
- CATEGORY: Audio/Visual
Related Products
Display Case For Cardi B’s Shure Axient Wireless Microphone
This case was designed to hold the now infamous Shure Axient Beta58 microphone that Cardi B threw at someone in the crowd during a show in Las Vegas in July of 2023. This case was donated to the microphone’s charity auction to act as a display case.
AMT Q7-LS Wireless Sax Mic System Case
This custom case is designed to hold the Applied Microphone Technology (AMT) Q7 LS Mini Bell Mount Wireless Saxophone System. The case features a custom CNC cut, PE foam insert to hold the Q7-LS receiver, a slot for AA batteries, power supply, mic on stem with the clamp and the transmitter. The custom foam case insert is mounted in a waterproof SKB iSeries case.
Shure Microflex Complete Wireless Conference Mic Kit Case - 15 Capacity
This custom transport case is designed for the Shure Microflex Complete wireless conference system. The custom case holds 15 microphones, 15 bases, 1 charger and an access point.
Shure Microflex Complete Wireless Conference System Mic Case
This custom Pelican case is designed to hold the Shure Microflex Complete wireless mic conference system. The case holds 5 MXCW640 base stations, a MXCWAPT access point transceiver and a MXCWNCS charging unit. A removable tray has storage for 8 microphones allowing various lengths to be sent with each system. The mic insert is designed around the MXC416DF and the MXC420DF microphones. The waterproof Pelican 1620 case features wheels and a retractable handle.
Austrian Audio OC818 Stereo Pair Heavy Duty Carrying Case
This case is designed to hold 2 Austrian Audio OC818 microphones. The case features a custom CNC cut PE foam insert that holds the mics and their accessories in individual compartments. The insert holds the mics, windscreens, mic clips, spider shock mounts and the mini XLR cables.
2 Capacity Shure MX418 Microphone Carrying Case
This case is designed to hold 2 Shure MX418 microphones. The mics are held in a custom CNC cut, PE foam insert. The insert contours the shape of the microphones and accommodates for the windscreens. A carpet lined accessory compartment is provided for mic clips, adapters and additional items.
Audio Technica 4047/SV Stereo Pair Microphone Case
This heavy-duty carrying case is designed for two Audio Technica 4047/SV large diaphragm condenser microphones. The case features a custom cut, PE foam insert that contours the shapes of the microphones and shock mount baskets. The foam insert is designed to hold 2 AT 4047/SV mics, 2 AT 8449a/SV shock mounts and a generic compartment for a K&M stereo bar.
30 Capacity Hand Held Mic Caddy For A-Series Workbox Drawers
This removable foam insert is designed around LM’s standard A-Series drawer. A list of compatible cases is listed below. The insert features 30 – 1.5” diameter circular cut outs to accommodate most handheld dynamic mics. The insert is designed to be removable to help expedite set up and tear down.
Large Format Mic & Stand Workbox
This large format microphone/stand workstation is designed for touring and installed applications. The “all in one” format holds 35 mic stands and 63 microphones in individual compartments.
Road Case For Shure SM7b Microphone
This case is designed to hold the Shure SM7b microphone, and large A7WS windscreen. The custom CNC cut PE foam interior is designed to hold the microphone with the RK345 windscreen attached. The case exterior is built from custom bent aluminum extrusion. The aluminum extrusion has built in tongue and groove to ensure strong alignment between the lid and case body. ¼” plywood panels laminated with your choice of ABS plastic colors make up the case top and bottom. A HD spring loaded handle allows for easy transport.
Shure SM7B Waterproof Transport/Storage Case
This case is designed to fit the Shure SM7B microphone and A7WS close talk windscreen. The custom foam insert holds the mic in either a left facing, or right facing direction with the thin windscreen attached. The yoke stand adapter is cushioned by foam positioned in any direction for a secure fit. Storage space in front of the microphone is available for the A7WS windscreen. The durable exterior case is made from injection molded plastic, and features double throw latches, rubber lined carrying handle, pressure release valve, and is sealed with a waterproof gasket.
Tonelux JC37 Stereo Pair Microphone Flight Case
This case is designed to hold 2 Tonelux JC37 microphones, the power supply, and the IEC cable. The foam insert is built from PE foam that is custom cut to contour each item. The microphones are located at the sides of the foam insert. Their tethered cables are pathed through the sides of the insert and stored below the power supply. A separate compartment is allocated for the IEC cable. Check out LM Tour System’s upgraded locking IEC cables for mission critical applications. The exterior case is built from LM’s XL Series aluminum. This series is based around custom mitered aluminum wrapped around ¼” plywood panels. The aluminum has integrated tongue and groove for a very strong seal. Surface mounted twist latched and a spring loaded handle are provided.
Shure Microflex Wireless System 10 Capacity
This case is designed to hold 10 mics and bases from the Shure Microflex wireless system. A removable tray holds 10 Shure MXC4200DF microphones in a custom CNC cut foam insert. Each of the MXCW640 bases are held in individual compartments below the tray.
Microphone / Stand Tech Workbox - 30 Capacity
This work station is designed for touring sound productions and venues with in house production. The work station holds 25 full sized mic stands and 5 low profile mics stands. The low profile stands are mounted in the front 5 compartments for easy access. The mic stand divider network is construction from black ½” non abrasive marine grade plastic. All edges are routed for easy loading. The stands rest on carpet to prevent gouging in the case bottom. The full sized stand compartments feature usable dimensions of 4.125” wide x 3.875” deep x 38” tall. The low profile stand compartments feature the same width and depth as the full sized stands with a reduced height of 20”.
Shure® ULX-D 8 Capacity Hand Held Rack Drawer
This drawer is designed to fit 8 Shure ULX-D Hand held mics. Each compartment is sized to fit all Shure capsules. An accessory compartment is included for general storage. The CNC cut foam insert is glued into a 2RU 18” deep HD rack drawer. The rack drawer features a key lock for security.
Professional Wireless PWS LPDA Antenna Case w/Combiner Rack
This case is designed to hold 2 PWS LPDA antennas, and features a removable 2RU rack shell. The antennae are held in a custom CNC cut foam insert that hold them in a nested configuration. The antenna compartment is separated from the rack via a pieces of 1/4” marine grade plastic, this prevents the antennae from rubbing against the bottom of the rack shell. The rack shell is built out of 1/2” Baltic Birch plywood and is finished with black texture coating. The shell features 10/32” pre-tapped front & rear rack rail. Each set of rails is recessed .75”, and has a rail to rail rack-able depth of 11.75”. All the interior components are held in a Pelican 1620 waterproof case.
Installed Brahler Microphone Workbox
This case was designed to be an installed workstation for Conference Systems. The case holds 40 Brahler TMD/01 gooseneck microphones, D-Doc and D-Mic bases in 9 custom drawers. The case lives in a venue and never sees road use, all drawers are held closed by 2 hinged panels secured with large valance spanning latches.
Waterproof Compact Microphone Workbox
This case is designed with the traveling sound engineer in mind. The case holds a basic mic kit in a waterproof Pelican 1510 case which is small enough to be carried on commercial flights, and durable enough to be checked as baggage. 12 circular cut outs hold SM57/58 microphones in the center of the CNC cut foam insert. There are individual compartments for a Shure Beta52 and a Beta91, although the compartments are specifically tailored to these mics; they are generic enough to accommodate a variety of larger low frequency mics. A condenser mic compartment is sized around longer mics like a SM81 and can fit multiple units. The DI compartment perfectly holds 3 Radial DI’s or 4 Whirlwind IMP’s. The accessory compartment holds rim mounted drum mics and assorted clips and adapters.
Microphone Tech Workbox
This case was designed for Loyola University to hold microphones and stands for their event services department. The workbox holds an assortment of mics, stands and components allowing the Event Services department to bring a singular workbox that holds all their equipment to events.
Audio Technica 4050 Stereo Pair Mic Case
This case is designed to hold 2 Audio Technica 4050 microphones and shock mounts in a waterproof case. The mics and shock mounts are held in a custom CNC cut PE foam insert that contours each items shape.