Products
Midas M32R Venue Install Mixer Case
As part of an installed sound system, our client had the unique need to store and protect the venue's Midas M32R while leaving it wired into the system. Because of limitations at the venue, the console could only be placed on a ledge that was not deep enough to accommodate it. The solution was to build a case that could be secured to the ledge at the rear and hang off at the front. To accomplish this, a set of table legs were cut to allow the case to use the rear ledge as a support and safely support the front weight via the legs.
Mac Pro Video Workstation
This case was designed for the University Of Wisconsin to hold an Apple Mac Pro tower, accessories and rack mounted equipment for a portable video conferencing system. The case features flat panel lids on the front and rear to make accessibility quick and easy.
Pelican 1600 1RU Rack Flypack
This case was designed for Starlight Visuals to hold a custom time code sync clock. The design features a 1RU rack with a removable bottom panel, and a signal and power panel built by the LM Cases Custom Integration department. The rack is held in a Pelican 1600 case with a custom CNC cut foam insert.
Custom Shoulder Pad Cart
This shoulder pad cart was built for Wake Forest University as a locker room storage solution. The cart is built out of 3/4" Baltic Birch plywood and finished with black texture coating. All edges are routed and finished with T Molding. The cart features a long removable pull handle and six 4" Colson casters, the rear two casters are fixed and the front four are 360 degree swiveling.
Waterproof Compact Microphone Workbox
This case is designed with the traveling sound engineer in mind. The case holds a basic mic kit in a waterproof Pelican 1510 case which is small enough to be carried on commercial flights, and durable enough to be checked as baggage. 12 circular cut outs hold SM57/58 microphones in the center of the CNC cut foam insert. There are individual compartments for a Shure Beta52 and a Beta91, although the compartments are specifically tailored to these mics; they are generic enough to accommodate a variety of larger low frequency mics. A condenser mic compartment is sized around longer mics like a SM81 and can fit multiple units. The DI compartment perfectly holds 3 Radial DI’s or 4 Whirlwind IMP’s. The accessory compartment holds rim mounted drum mics and assorted clips and adapters.
Vinten Vector 750 Pan Head Case
This case was designed for NEP to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut foam insert. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features a custom silkscreen of the NEP logo.
UNC Charlotte 49ers 100 Capacity Shoe Trunk
This trunk was designed for UNC Charlotte 49ers football program to hold 100 pairs of shoes. The trunk interior features a 1/2" Marine Grade plastic divider network and is finished with black texture coating for easy clean up.
University Of Nebraska Tape Trunk
This trunk was designed and built for the University Of Nebraska as a portable tape storage unit. The trunk features 4 drawers with 2 removable bins ea with dowels for tape storage. The front lid is removable and becomes a table.
Tennessee Titans Athletic Trainers Workbox
This trunk was designed and built for the Tennessee Titans as a portable workstation for their athletic trainers. The trunk is designed with dual front doors allowing for storage of small items and 4 heavy duty drawers for the storage of larger items. The trunk features large field casters allowing it to roll easily to the sideline allowing all equipment to be easily accessed during games.
Avid S6L-24 Console Case w/Doghouse & Monitor Storage
This case was built for Maryland Sound International to hold an Avid S6L-24 mixing console. The case interior is designed as a mirror image of console, the foam follows all the contours of the desk for the ultimate support in any orientation. A custom doghouse is included for a finished look in addition to two monitor mount posts allowing monitors to be positioned on either side of the console.
Avid S6L-32 Console Case w/Doghouse And Monitor Storage
This case was built for Maryland Sound International to hold an Avid S6L-32 mixing console. The case interior is designed as a mirror image of console, the foam follows all the contours of the desk for the ultimate support in any orientation. A custom doghouse is included for a finished look in addition to two monitor mount posts allowing monitors to be positioned on either side of the console.
Disney Portable Network Rack
This case was designed for Walt Disney World to provide a portable network hub for audio and lighting throughout their park. The equipment as well as the rack was built and integrated by our in house Custom Integration department.
Midas M32 Audio Workstation
This case was designed as an audio workstation for a portable church. The console is mounted on a slide out shelf that uses multi-position locking latches allowing the shelf to be locked into various extended points to make operation easy. 4RU racks are mounted above the console to keep wireless mics and IEMs in clear view. Below the console work surface are dual 10 space racks for storage of additional gear and rack mounted drawers.
Samsung SD850 32” Display Case
This case was designed to hold a Samsung SD852 32" display. The monitor is held in a custom 2" Ester foam lined compartment that accommodates the display with the telescoping desktop mount attached. The case also features a 4" accessory compartment for peripherals.
NHK Camera Tripod Head Case
This case was designed for NHK America to hold a camera tripod head. The head is held in a custom CNC cut foam insert with a removable marine grade plastic divider that allows for storage of 2 control arms and an extension arm on top of the head.