Products
Portable Grass Valley Karrera Video Production Work Station
This case was built for World Stage to hold their Grass Valley Karrera production switcher. The Karrera is mounted to an extendable shelf that is designed to allow users to sit or stand behind the unit during operation. The case features 3 - 12RU rack bays for future expansion as well as storage for the control monitor and mount arm.
Fender Pro Sonic Amp Case
This case was designed for Elevate Life Church to hold their Fender Pro Sonic combo amp. The case has a 1" PE foam lined interior with a 2" PE foam bottom under the amp. The exterior case is built out of 3/8" plywood laminated with black ABS plastic and features deep recessed handles, and 4" Colson casters.
Portable Weight Room Media Center
This system was designed for the Philadelphia Eagles as mixed media playback device for the teams weight room. The system is comprised of a 50" Sony LED TV, KRK studio grade sound system and a Apple TV for wireless communication.
Portable Locker Room Sound System Trunk
This trunk was built for Calhoun County ISD as a portable sound system for their locker room allowing the team to make announcements and play music. The trunk and internal sound system was designed and built by the LM Cases Custom Integration department.
8 Capacity Leko Light Case
This case was designed for Volt Lights to hold 8 Leko light fixtures with clamps attached. The exterior cases dimensions are based around a 96” truck pack. The case features an all 1/2” Marine Grade plastic divider network. The lights ride on a 2” PE foam block with a 1/4” Marine Grade plastic board laminated on top to prevent the end of the light from digging into the foam. The exterior case is built out of 3/8” plywood and features, stacking caster wells, 4” Colson casters, 8 deep recessed handles and a route out for a PAL label in the lid.
Akai MPK88 MIDI Keyboard Controller Case
This tour grade case is designed for the Akai MPK88 key controller. The case holds the controller in a 2” PE foam lined interior and features an accessory compartment for the power cord and misc. cables. The exterior is built from 3/8” plywood laminated with your choice of ABS plastic and deep recessed handles. The case features in board 3” dolly casters which feature custom brackets that allow them to be replaced by the user using a Phillips screwdriver.
Yamaha QL5 Audio Workstation
This case was designed to be a portable front of house production workstation centered around a Yamaha QL5 console. The case holds the console in a custom 1" PE foam lined compartment with space behind the console for cables and connections. To the right of the console, the case features a Formica laminated slide out work surface which is perfect for a stage managers call sheets or as an auxiliary laptop station.
Akai MPK61 MIDI Controller Keyboard Case
This tour grade case is designed for the Akai MPK61 key controller. The case holds the controller in a 2” PE foam lined interior and features an accessory compartment for the power cord and misc. cables. The exterior is built from 3/8” plywood laminated with your choice of ABS plastic and deep recessed handles. The case features in board 3” dolly casters which feature custom brackets that allow them to be replaced by the user using a Phillips screwdriver.
Custom Fender Stratocaster Case
This case is designed to your cradle your Fender Stratocaster in a custom CNC cut Ester foam insert that supports the guitar at its varying heights. The foam insert is designed to hold all models of Strat with all head stocks and body contours. The Ester foam insert is hand wrapped with black crushed velvet to ensure the most delicate touch to your instrument. The exterior case is built out out 1/4” plywood to ensure that the case is a light as possible. This case is designed to allow your guitar to be checked on commercial airlines and provide you piece of mind that your instrument will be safe; no matter how rough the handling.
Vox AC15 Amp Case
This case is designed for the Vox AC15 combo amp. The amp is held in a 1” Ester foam lined interior with a 2” PE foam bottom under the amp. The exterior case is built out of 3/8” plywood and features 4 latches, 2 deep recessed handles and 4” Colson casters with a full 3/4” Birch caster pad.
Christie WU12KM Projector Case
This case was designed for AdvanceConcepts to hold a Christie WU12KM projector and two lenses. The projector is held in a 2" foam lined compartment while the lenses are held in a custom removable lens case. The lens case is built out of 1/2" Baltic Birch plywood finished with black texture coating. The lens case can be stored or transported independently of the exterior case allowing maximum flexibility for rentals.
27” Apple iMac Travel Case
This case was designed for Starlight Visual to hold a 27" Apple iMac. The monitor is designed to be transported screen up with custom foam blocks contouring the back of the monitors. The stand fits into a recessed foam compartment allowing the monitor to ship as an assembled unit with out modification. The screen rides face up resting on a piece of Crosslink foam mounted in the lid. Crosslink foam is a Class A surface designed to touch delicate glass items like glossy monitor screens and projector lenses. The custom CNC cut foam insert also includes compartments for a full size Apple keyboard and two additional compartments for mice and cables.
ETC Source Four Ellipsoidal Case - 4 Capacity
This case was designed for Panavid to hold 4 ETC Source Four fixtures with clamps attached. The case features a hinged top and dual opening front lids allowing the fixtures to only be lifted a few inches to be loaded and unloaded from the case. Each fixture is held in a separate carpet lined compartment with a 2" PE foam bottom. A piece of 1/4" Marine Grade plastic is laminated to the PE foam of each compartment which prevents the fixtures from damaging the foam. The lids feature deep compartments for the storage of Powercon and DMX cables.
WWE Divas Wardrobe Workbox
This workbox was built for World Wrestling Entertainment as a wardrobe storage case for the Divas costumes. The case features 5 drawers built out of 1/2" Baltic Birch plywood mounted on HD Accuride glides. The drawers are mounted in a shell that is independent from the exterior case which prevents any damage to the drawers during rough handling. The case also features 4 shelves mounted in the lid for additional storage.
Custom Surgical Tray Transport Case
This case was designed to transport surgical instrument trays. The case features 4 compartments with removable, adjustable 3/4" Birch shelves to accommodate trays of varying sizes. Each removable shelf is carpet lined in the center and black painted at the edges to allow easy removal.