Products
Hillsdale College Custom Athletic Trainers Sideline Kit
This trunk was designed for Hillsdale College as a custom athletic trainers workbox used on the sideline at games. The trunk holds medical items ranging from tape and bandages to a strecher board.
Discount Dance Supply Portable Merchandise Case
This case was built for Discount Dance Supply to hold and display merchandise at trade shows. The case is designed to be loaded up at the DDS shop and shipped to shows to double as a transport/display case. The case features a gray texture coated interior with a hanging bar for costumes. The front lids swing open and feature slat wall allowing standard retail hooks to be used for selling small items. The interior also features a flip up board that is covered with black carpet allowing signs to be attached with Velcro. The LM Cases Custom Integration department mounted LED lights to the roof of the case to ensure proper illumination during shows.
Smart Technologies Trade Show Workbox
This workbox was designed for Smart Technologies as a way to transport tools and peripheral equipment to build their trade show booth's. The case is intended to be a central tool box holding everything from extension cords and office supplies, to hand tools and back up system components.
Yamaha LS9-16 Case With Doghouse
This case was designed for VAE to house a Yamaha LS916 console. The case features a 1” Ester foam lined interior with custom blocking at the palm rest and by the integrated screen. A 8” deep doghouse built out of high quality 3/4” Baltic Birch finished with black texture coating hides the I/O section of the console for a sleek finished look perfect for corporate events. The exterior case is built out of 3/8” plywood laminated with your choice of ABS plastic and features 3 recessed handles and 3.5” casters with a full 3/4” Birch caster pad.
Portable Marching Band PA System Case
This case was designed for the Palen Music Center to provide an on field PA system control case that can be towed on the field with a Gator, ATV or pickup truck for a marching band's half time show. The case is designed around a Presonus Studiolive 24.4.2 mixer and has 3 shock mounted racks for equipment storage.
Portable Photo Booth System
This system was designed for Wenning Entertainment as a complete modular photo booth system. The system is compromised of 2 parts: a top case that holds the camera, lights and computer; and a bottom accessory case that holds the printer, paper, extension cords and replacement ink.
Custom Clark Wire Cable Reel Case
This custom cable reel case was built for Amplio Systems to transport and store a Clark Wire CWR-528 cable reel. The reel is mounted to a 1/2" internal mounting board inside a black painted interior, with installation completed by the LM Cases Custom Integration department. The exterior is constructed from 3/8" plywood laminated with black ABS plastic and features four deep recessed handles and 4" Colson casters for durable, portable transport.
Presonus 16.4.2 Roadcase
This case is designed for a Presonus 16.4.2 mixing console. The console is held in a 1" foam lined interior with a 4" accessory compartment behind the console for storage. The front foam is notched to allow easy access to the console's headphone jack. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and has 3 recessed handles.
Los Alamos National Laboratories Portable Testing Workstation
This case was designed for Los Alamos National Laboratories as a portable testing workstation. The case holds a monitor mounted in the lid, a 16RU shockmounted rack section and a custom foam lined compartment for the Dell computer.
NEC x463UN 5 Capacity Monitor Case
This case was designed for ABCOM to carry 5 NEC x463UN video wall monitors. Each monitor is held in a custom compartment lined with 1.5" Crosslink foam. Crosslink foam features a Class A surface that wont scratch the delicate monitor faces. The compartments hold the bottom 2/3 of the monitor allowing easy access to the handles on the rear of the units for easy removal. A 7" accessory compartment is also included for cords and other peripherals.
NEC x463UN Case w/Premier MVW463 Mount
This case was designed for Alternative Video Solutions to hold 2 NEC x463UN monitors and 2 Premier MVW463 video wall mount brackets. The case holds each monitor in an individual slot that is lined with 2" Ester foam and features a piece of 1/2" Crosslink foam that touches the monitor face to prevent scratches. The Premier mounts are held in a black carpet lined compartment.
70 Capacity Football Cleat Travel Trunk
This trunk was designed for West Virginia University to hold 70 pairs of cleats. The trunk's interior is finished in black texture coating and features a divider network built out of 1/2" marine grade plastic. The trunk rides on 4" Colson Casters and features 12 recessed vent dishes. The trunk exterior is built from 3/8" plywood laminated with navy blue ABS plastic.
University Of Utah Uniform Trunk
This trunk was designed for the University Of Utah to hold uniforms when the team is on the road. The trunk is divided in 2 sections, each carpet lined with hanging bars. The exterior trunk is built out of 3/8" plywood laminated with red ABS plastic. The trunk rides on 8 - 3.5 " Casters.
University Of Oregon Outdoor Coaches Trunk
This trunk was designed for the University Of Oregon as a portable coaches travel trunk that can be used on the sideline and in outdoor settings. The trunk features 16 cubbie compartments and 3 drawers with removable dividers.
Orange OBC410 4x10 Bass Cabinet Case
This case was designed to be a live in style case for a Orange OBC410 bass cabinet. The cabinet is held in a 1" PE foam lined compartment with a trap door on the back of the case to access the cabinets input section.