Products
Custom Behringer x32 Road Case w/iPad Holder
This case provides a durable home for your Behringer x32. The case interior features a 2" foam lined interior with custom foam blocking around the console to keep it secure even during rough handling. Mounted behind the console is a doghouse that is built out of 3/4" Baltic Birch plywood and finished with black texture coating. The doghouse features a custom holder for an iPad that allows it to be displayed and also easily accessible to grab it and go. The doghouse iPad holder is beneficial over a mount in the sense that it allows you to quickly grab the iPad without detaching it from a mount. If you aren't using an iPad, the holder works great as a safe spot for scripts or set lists. During transport, the iPad is stored in the case lid which allows the case to ship as a complete package; perfect for rental applications.
48” x 24” Half By Quarter Pack Utility Trunk | 96” Truck Pack
Heavy-duty cable trunk designed for storing large and heavy production cables. Features a durable easy-to-clean textured interior coating, recessed lid stays for safer loading and unloading, deep recessed handles, and heavy-duty Colson casters for reliable transport in touring and live event environments.
24” x 24” Third Pack Utility Trunk
This trunk is perfect for storage of heavy cables. The case interior is finished with durable black texture coating that can easily be wiped clean. The lid is supported by recessed lid stays that hold the lid open without the need for interior mounted cables or straps. Recessed lid stays are beneficial for "catch all" trunks, standard strap or cable lid stays can cause the lid to close unexpectedly if they are hit when loading/unloading the trunk.
Craftsman 40” Top Chest ATA Toolbox Case
This case was designed to hold the Craftsman 40" 8 Drawer Griplatch tool box. The exterior case is built out of 3/8" plywood and features textured black fiberglass laminate. The case features a hinged top lid and removable front lid as well as 8 deep recessed handles. The case sits on a removable caster dolly that is built out of 1.5" thick baltic birch and coated with black texture coating. The case locks into the dollyboard using male and female feet and cups, the dolly board includes 4 Colson super HD 4" x 2" locking casters.
Craftsman 40” 14 Drawer Griplatch ATA Case
This case was designed for the 40" Craftsman 14 drawer Griplatch tool box. The case is built out of 3/8" plywood and is laminated with black textured fiberglass. The exterior case features deep recessed handles and 4" x 2" Colson locking casters. The case is designed to stack with the 8 Drawer Toolbox to make a full workbox set.
Portable Large Format DIT Workstation
The Portable Large Format DIT Workstation was designed for Angel Valley Media. The LM Cases Custom Integration Dept pre-wired to accept a variety of professional monitors by including Displayport, HDMI and AC Power cables pre installed into the case lid. Power and signal are kept separate; each cable bundle is wrapped in Techflex and finished with heat shrink tubing. All cables are labeled at both ends. The monitor lid is supported by gas springs, which aid in opening the lid and ensuring that it stays open during use. Below the monitors is a dual 4RU rack section, which is primarily designed for preview monitors and any piece of gear less than 6" deep. The rack section is mounted at a 50-degree angle allowing producers to stand behind operators and still have an undistorted view of the rack-mounted components. On each side of the rack section is a bank of 4 USB 3.0 ports with 10' extensions allowing ports from rack-mounted components to be conveniently addressed at the work surface. Also included are 2 duplex AC power outlets with integrated USB charging ports that provide 4 total courtesy USB & power outlets. The dual 4RU rack section features a trap door with 2 recessed vent dishes for quick access to the back of the rack components and USB/power banks. Below the rack section is a 51.75" x 20" pull out work surface, that is made out of 3/4" Baltic Birch and is finished in black texture coating. The work surface features position locks allowing it to be locked into several fixed positions while retracted, this feature is operated by a low profile T-pull handle. Below the retractable work surface are dual 9RU rack sections that include rear rack rail and a rackable depth of 21". The back of rack section is accessed by a removable trap door that features 2 recessed vent dishes and 2 recessed cable hatches. The cable hatches allow cables to be passed through the trap door while it is still closed. The front removable lid features 2 sets of table legs allowing it to be used a massive production table measuring 56.5" x 46". The front lid has 4 slim recessed handles mounted in the sides to aid in removal and moving to its storage location. The exterior case is built of 1/2" plywood and features 6 Colson 4" x 2" casters (3 locking) and 4 deep recessed handles.
Yamaha QL1 Double Wide Workstation
This case was designed for United States Audio Visual. The top work surface of the Yamaha QL1 Double Wide Mixer Workstation features a 15RU angled rack section built out of 1/2" marine grade plastic that holds the console. To the right of the console is a large work surface that can accommodate a small lighting or video controller or provide for a stage manager to call a show. Below the console are two fully shock mounted 14 space racks with rear rack rail and independent rear trap doors. Each rear trap door features a "mouse hole" allowing cables to remain plugged in while the doors are closed. The right rack section features a recessed Hubbell power box that features a power inlet wired to a Hubbell duplex outlet and a Neutrik cat5 jack. The box provides a fully enclosed solution for providing power to the case and supplying a digital snake feed line.
Inline Power Outlet w/Mounting Tabs
This power box is designed to provide an inline 15amp courtsey outlet in the middle of a Powercon run. The box can be used as an extension adapter to combine Powercon cables or provide a outlet at the end of a run.
5 Drawer Production Workbox
The LM Cases 5 drawer workbox is the perfect addition to any mobile production. Designed to fit around 90" & 96" truck packs, the exterior dimensions are 22.5" wide by 30" deep. The workbox features 5 drawers that are built out of 1/2" Baltic birch and joined via interlocking dove tails. The drawers are finished with black texture coating. All drawers feature recessed handles and are mounted on HD Accuride drawer glides.
Camera Controller Flypack Workstation
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock Group as part of a 3 case portable system that is designed to travel between buildings on their campus. This case is designed to compliment the main A/V control unit (more info on that case can be found HERE) by offering a independent camera control station. This case is designed to have the same depth and height as the main workstation allowing the two cases to have a similar esthetic and flow when working next to each other.
Portable Audio/Video Workstation Road Case
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock Group as part of a 3 case portable system that is designed to travel between buildings ontheir campus. This case is the central piece of the system holding the mixer, video switcher, preview monitors and rack mounted components.
Apple Mac Pro Media Server Kit
This case was designed to hold a 2014 Apple MacPro and non rack mounted components in a simple 6RU package held in a Storm Case. The MacPro is held in a custom mount designed to shock mount the computer within the rack, more on the mount can be found HERE.
2014 Apple Mac Pro Mount Kit
The LM Cases mount is designed to hold the new cylindrical Apple Mac Pro tower introduced in late 2013. The kit is designed to fully shock isolated the computer allowing it to be mounted in non shock mounted mobile racks, shelves and drawers.
Shure ULXD4Q 4 Channel Wireless System Case
This case was designed for Starway Productions to hold their 4 Channel Shure ULXD4Q wireless microphone system. The 1RU receiver is held in a 1/2" Baltic Birch inner rack shell that is finished with black texture coating. All system components are held in a custom CNC cut foam insert: each hand held mic has its own compartment while the lav beltbacks are stored in joining compartments that allow their antennas to share the same space while keeping the packs isolated. There are also individual compartments for each battery and the systems antenna's. The entire system is held in a Pelican 1610 waterproof case.
Electro Voice R-300 Wireless System Case
This case was designed to hold four Electro Voice R-300 wireless systems compromised of receivers, hand held microphones, lavaliere microphones, batteries and cables. All components are held in a custom CNC cut foam insert.