Products
Custom Stanford Medical Tape Trunk
This case was built for the Stanford Sports Medicine department. The case is built out of 3/8" plywood and features 5 drawers with removable tape caddy's. Each tape caddy is built out of 1/4" plywood and features a removable dowel set to allow each caddy to be used for tape or other miscellaneous storage. Each dowel set features 30 dowels for tape rolls for a total of 150 tape dowels for the case.
Custom Pelican-Hardigg ACS AL4024-1305 Caster Case
This case was designed for a custom caster company to hold their sample casters. The case features a custom multi-layered insert in a Pelican-Hardigg AL4024-1305 case. LM Cases fabricated custom caster mounts and added 3.5" Colson Poly Hi-Tech casters to the case. The insert was cut out of 4lb PE foam in our CNC foam shop.
Midas XL3 EXT 16 Channel Extender Case
This case was built for Concert Productions. The case is built out of 1/2" plywood laminated with purple ABS, and features a 2 piece removable lid, 3/4" birch hi-gloss doghouse, and 4" casters.
Custom LM Cases Mic Trunk
This case was built using our Econo #2 design. The case features a removable tray with a custom CNC cut foam insert to hold 8 Shure SM57/58's, 3 Shure Beta98's, 4 Shure Beta91's, 1 Shure Beta 52, 2 Sennheiser MD421's, and 4 Radial JDI's.
28 Capacity Waterproof iPad Case
This case was designed to transport 28 Apple iPad's to and from trade shows. The design is based around a Pelican 1660 case and features a custom CNC cut insert to hold each iPad in a foamed compartment. The case design also allows storage for the iPad's power supplies.
Yamaha LS9-16 Flight Case
This case is designed for a Yamaha LS9-16 mixing console. The case is built out of 3/8" plywood and features a 2" foam lined interior with 3 1/2" casters.
Alesis DM5 & Control Pad Electronic Percussion Case
This case was designed to hold an Alesis DM5, Alesis Control Pad and all the necessary support cables to power each device. The Alesis DM5 is mounted into a custom built rack shell that features the mounting post for a Roland APC-33 clamp, both the Control Pad & the DM5 rack feature the Roland APC-33 mounting post.
Custom Pink 4 Drawer Workbox
Sick of a plain black workbox? Try pink! This workbox is built from 3/8" plywood and features 4 drawers mounted on HD Accuride drawer glides. The front lid is hinged and the case features 5 - 4" Colson casters, and 12 recessed handles.
Custom Sanyo PLC-ZM5000L Projector Case
This case was designed and built for Panavid. The case is designed to hold a Sanyo PLC-ZM5000L projector, 3 lenses and 8 spaces of rack equipment. Panavid primarily uses the case for corporate events, keeping the case aesthetically pleasing as well as functional was a top priority. The projector is designed to be used with the top lid of the case on to allow a finished look. We created an angled piece of PE foam to elevate the front of the projector to allow for a proper viewing angle. If a steeper angle is needed, they can simply remove the lid and use the integrated feet to achieve the desired angle.
Custom ATA Drum Hardware Case
This case is built out of our proprietary 1/4" composite panels laminated with stucco aluminum. The case features 4 black carpet lined compartments for hardware storage, inboard dolly casters, custom black rivets and a custom silkscreen of the customer's logo.
Panasonic PT DZ12000U Projector ATA Case
This case was built to hold a Panasonic DZ12000U projector. The exterior case features 3/8" plywood, 3.5" casters and stacking caster wells in the lid. The interior case holds the projector in a 2" foam lined compartment, there is also a custom compartment for the ET-D7SLE6 lens.
Booz Allen Hamilton 26” NEC Monitor/Levono Laptop Case
This case was built for Booz Allen Hamilton for their touring trade show department. The case is built out of our proprietary 1/2" composite panels and is outfitted with a 1/4" aluminum forklift guard around the bottom of the case. The exterior also feature stacking caster wells mounted in 3/4" birch plywood pads and a custom silkscreen of the companies logo. The interior of the case features a custom CNC cut foam insert that holds 4 - 26" NEC LCD monitors and 5 Levono laptops. There are also two accessory compartments for peripheral cable and misc. storage.
Triple Wide Flat Panel Shock Mounted Rack
This case was designed for Maryland Sound International. The case feature 3 rack sections outfitted with front and rear pre-tapped rail as well as unistrut for cable management. The exterior case as well as the inner rack shell are built out of 1/2" plywood and feature deep recessed handles, 4" x 2" casters, recessed PAL label dish, and a custom silkscreen of the Maryland Sound logo.
75 Capacity iPad ATA Case
This case was designed to hold 75 Apple iPads. There are 3 shelves that hold 25 iPads per shelf in custom Crosslink foam inserts. The Crosslink foam is a Class-A surface that will not scratch or leave abrasive marks on the glass or aluminum surface of the iPad. Each piece of the Crosslink foam insert was cut on our CNC fast wire saw, this allowed each compartment top and bottom foam piece to remain one solid unit to create a stronger and more durable foam insert. Below the iPad shelves, is an accessory compartment to hold the unit's power supplies.
LM Cases Outline Mini Comp.a.s.s. Array Flight Cases
This case was designed and built for Maryland Sound International. The case is designed to hold 4 Outline Mini Compass line array elements. Two elements are rigged together and placed in a custom CNC cut foam insert, there are also custom foam cut outs for 8 splay bars between the two sections. The portion of the insert that holds the elements features an angled piece of PE foam that matched the angle of the cabinet so that the rigged elements will sit flat in the case.