Products
Custom Stackable Econo Trunks
These cases were designed and built for Panavid Inc. The design is based around our standard Econo trunk, the cases employ small recessed caster wells to be used for stacking. The caster wells are reverse mounted as "feet" on the bottom of each case, and mounted in their intended way as "cups" in the lid of each case. This allows the trunks to stack with other cases with casters permanently mounted. The "cup" and "foot" scheme is designed to allow stacking between trunks that do not have casters. We designed a removable 1.5" Birch removable dolly that features stacking cups and Colson 4" casters. The dolly's are coated with our proprietary textured coating to create a very durable yet aesthetically pleasing surface.
Allen & Heath iLive T80 and iDR 32 ATA Cases
These cases were designed for Presentation Services (PSAV). The case set is designed to hold the Allen & Heath iLive T80 and the iDR32 remote stage box. The console case is built from 3/8" plywood and features a 2" foam lined interior, 3.5" casters, custom PSAV ID tag, and the 2 color PSAV silkscreen.
Silvertone 1484 Twin Twelve Amp Case
This case was designed for the Silvertone 1484 Twin Twelve guitar amp, the case accommodates the speaker cabinet with the amp head stored inside. The exterior case is built out of 1/4" plywood and is laminated with forest green ABS plastic. The case features 2 recessed handles and rides on 3.5" casters (2 locking + 2 non) with a full 3/4" Birch caster pad.
Yamaha LS9-32 Install Workstation
This case was designed as part of an installation project provided by North American Theatrix. The case is designed to blend in when it is installed at a theater, the case is built out of 3/4" birch and features LM's black textured coating.
Yamaha LS9-32 Mixer ATA Workstation
This case was designed to hold a Yamaha LS9-32 mixer. The case features a double wide shock-mounted 16RU rack section as well as a custom Birch doghouse that contours the back of the console.
Roland M300 ATA Case w/Doghouse
This case was designed to hold a Roland M300 compact digital mixer. The case features a 1" foam lined interior and a black texture coated 3/4" Birch doghouse. The exterior is built out of 3/8" plywood and features 3.5" Casters.
University Of Georgia Amenities Trunk
This case was designed for the University of Georgia football program. The case features a refrigerator and microwave as well as a coffee pot mounted on to a slide out shelf, the coffee pot also comes standard with 2 stainless steel travel mugs. For storage, the case features 2 shelves covered with a latched door as well as an extra deep drawer. There are also table legs mounted in each of the cases two removable lids.
University Of Minnesota Fridge/Microwave Case
This case was designed for the University of Minnesota. The case holds a refrigerator and microwave to be used not only for feeding the UMN crew, but also for cold/heat packs, medical, and hydration supplies that need to be readily available during each game.
Custom 60 Capacity iPad Flight Case
This case was designed for AMCI Global. The case is designed to hold 60 iPad's and accessories in two removable trays. Each tray is made out of 3/8" plywood and features a custom CNC cut foam insert to hold each iPad in its own foam compartment. The iPad's are stored in each compartment upside down allowing them to charge in their own compartments to keep things organized. The compartment under the trays is lined with black carpet allowing storage for cords and power strips. There are trap doors located on two sides of the case allowing for cables to enter and exit the case with the lid closed and locked. This feature allows the iPad's to charge in a locked case, this is especially useful in trade show applications where equipment is left unattended over night.
Scoreboard ATA Lift Case
This case was designed to hold a custom Daktronics scoreboard for tradeshow use. The scoreboard is mounted to an electronic lift that can either be controlled via a hardwired switch on the case or a hand held wireless remote control. The case features mounted power strip and a trap door on the bottom of the case to allow for clean wiring in and out of the case.
Soundcraft Vi6 Custom Flight Case
This case was built for Maryland Sound International, and is designed to hold a Soundcraft Vi6 Console. The interior of the case features a slide out keyboard tray, a 2RU rack drawer and storage for 2 LCD monitors.
Custom ArmaLite AR-50A1 Rifle Case
Custom 1/4" ATA rifle case designed to protect and transport an Armalite AR501 with a precision-cut, multi-layer polyethylene foam interior. The case features foam-filled lid cushioning, flexible insert components for secure immobilization, and rugged plywood construction laminated in silver ABS. Recessed hardware, aluminum extrusion, and steel ball corners provide durable, road-ready protection in a clean, professional format.
Custom University Of Virginia Nutrition Sideline Trunk
This case was built for the University Of Virginia, the case is designed to be used as sideline storage for the team during games. The interior of the case features 10 individual storage compartments as well as 2 large drawers mounted on HD Accuride glides.
JBL VRX918S/P Sub ATA Case
This case is designed to hold a single JBL VRX 918S/P. Because the exterior dimensions of the subs are the same both the 918S and 918P will fit in this case. The case is built out of 3/8" plywood and features a 1" PE foam lined interior, 3.5" casters and 4 recessed handles.
LM Cases Custom 10 Space Shock Mounted Rack/Mixer Steve Harvey Morning Show
This case was built for the Steve Harvey Morning Show. The case is designed to hold a rack mounted mixer and rack mounted processing equipment. The mixer section has 11 rack spaces, and the equipment section has 10 spaces with rear rack rail. The entire rack structure is mounted in a 2" foam surround to provide shock absorption on the road. The outer and inner structures are built out of 3/8" plywood. The case features 3.5" casters mounted on a 3/4" birch caster pad.