Products
University of Georgia Coaches Trunk
This trunk was built for the University Of Georgia. The case is built out of 3/8” plywood laminated with red ABS plastic and features a silkscreen of the team's logo. The case features 15 storage compartments in each side of the case, to hold a variety of items including shoes and players personal belongings. The left side of the case features a clear Lexan door to keep the items separated from the right compartment. Each side of the case also features 2 drawers which are outfitted with a custom removable divider network. Each drawer is mounted on heavy duty Accuride drawer glides to ensure years of reliable performance. The case also features 4” Colson casters, and recessed hardware.
Princeton Sideline Trunks
These trunks were made for Princeton University. The trunks are built out of our proprietary 3/8" composite panels and feature custom silkscreens of the teams logo. Each trunk is equipped with 8" foam filled field casters, a pad lockable hasp latch, and 4 recessed handles. The trunks have interior dimensions of 43" wide x 20.5" deep by 22" tall and weigh 100lbs. Special thanks to Princeton University!
Stanford Laundry Trunk
This case was made for Stanford University. The case is designed to transport and store team apparel. The unit is designed to hold clean clothes on hangers via hanging clothes bars. Equipment managers can simply open the case and allow team members to pull their uniforms out in the same manner as a home closet.
CoachComm Tempest FX Sideline Accessory Rack
This case was made for CoachComm. The case is built out of 3/8” plywood, and features silkscreens of the companies logo, pad-lockable hasp latches, recessed cable hatches, and 8” foam filled field casters.
Florida Gators Workbox
This trunk was built for the Florida Gators to provide a quick access storage solution that can live on the sideline during games. The trunk features 8 storage drawers built out of 1/2" Baltic Birch. Each section of 4 drawers are mounted in an independent cabinet that is isolated from the exterior case. Building an independent inner cabinet from the exterior case prevents exterior stresses from transferring to the drawer glides; the exterior panels can flex without affecting the drawer glides. This design is superior to mounting the drawers directly to the exterior case and will provide years of service.
Nintendo Chooses LM Cases For Hardware Case
This case was built for Nintendo Of America for their trade show division. The case was designed to hold Wii's on one side and DSi's on the other. The case features foam lined compartments with adjustable foam blocks to adjust to the difference in sizes in components; this feature allows Nintendo to take varying quantities of items depending on the show. The case also features drawers in the bottom of each section for misc items.
Video Workbox
This case was built for RCI Sound Systems in Maryland. The case is built out of 3/8" plywood and features 10 drawers mounted on heavy duty Accuride drawer glides, the case also features a work surface. The case is using a forest green laminate and 4" Colson casters.
Custom ATA Snake Case
This case was built for PA based sound company Freelance Audio. The case is designed to hold a 16RU snake stage box and main trunk line. The main snake cable is stored in a 33.5" x 19.25" carpet lined compartment that has a removable panel tethered via airline cable to allow the cable to be removed from the case with the lid closed.
Boeing Chooses LM Cases For NEC P401-AVT Monitor
This case was built for the trade show division of Boeing. Because of Boeing's demanding trade show schedule, they had special needs when it came to the durability and functionality of their case. In order to maximize their strength-to-weight ratio LM Cases employed our proprietary composite panels to allow Boeing's cases to not only be more impact resistant than plywood, but to also be 30% lighter.
Nord Electro 3 73 Key Keyboard Case
This case was built for the band Interpol. The case was designed to hold a Nord Electro 3 - 73 keyboard and accessories. The case is built out of 3/8" plywood and features inboard dolly casters and "sandwich foam" which is 1" soft ester foam laminated to 1" hard PE foam. This method allows for the shock protection that ester foam provides with the durability and ruggedness of the dense PE foam.
Pelican 1740 Drum Hardware Case
Finally a perfect case to transport stands! When you need something a little stronger than a canvas bag, check out the Pelican 1740 case. This amazing box can swallowed up 6 cymbal stands, a snare stand, and a hi-hat stand with room to spare! Not to mention that it can do all of this and weight only 24lbs empty! This little box also is completely waterproof and features a lifetime guarantee!
3 Capacity Mesa 5:25 Express Head Live In Road Case
This case was built for the touring production of Shrek the musical. The case is designed to hold 3 Mesa Engineering 5:25 heads in a "live in" configuration. Each head is held in a custom foam lined compartment, supported by a 3/4" Baltic Birch divider.
Pelican 1740 Mic Stand Case
Finally a perfect case to transport stands! When you need something a little stronger than a canvas bag, check out the Pelican 1740 case. This amazing box can swallow up 8 straight stands with weighted bases, 10 tripod stands, and 2 speaker tripods! Not to mention that it can do all of this and weight only 24lbs empty! This little box also is completely waterproof and features a lifetime guarantee!
Custom Mixer Workstation
This case was designed for Spring Hill Camps. The case features a 18RU equipment section with rear rail, as well as a 11 RU mixer section to accommodate a rack mounted mixer. The case also features a foam lined compartment for a projector, speaker stand storage in the rear lid, and a black formica laminated production work surface.
Compact Live Sound Microphone Case
This case is designed for live sound microphones. The case features a custom CNC cut PE foam insert. The insert features 6 main compartments for handheld mics. These compartments are 2” wide x 8” deep x 5” tall. Each compartment comes with 2 removable ½” PE dividers. These dividers can be placed at the bottom of the compartment when not in use, or when only a single mic needs to be stored. The dividers are designed to separate mics when several units are needed to be placed in a compartment. The foam insert features 2 large compartments that are 8” wide x 3.5” deep x 5” tall. These 2 compartments are designed for larger mics and or clip style drum mics.