Products
Air Force Academy Equipment Field Trunk
This case was designed to be a multi purpose storage case for the Air Force Academy athletic department. The case was designed around plastic bins with removable dividers. The bin concept was utilized to make lightweight portable kits to allow several people access to the stored equipment at once. The case also features 2 traditional wood drawers with divider networks.
Cisco Chooses LM Cases For Their Mobile Server Rack
This case was designed to house Cisco servers used in mobile applications. The case is built out of 1/2" plywood, and features a 1/2" inner rack shell mounted in 2" of foam to provide shock protection. The rack holds 21RU of gear features a 33" deep shell to accommodate the extra deep servers. The case features all recessed hardware and 4" x 2" HD casters mounted on a Birch pad. Special thanks to Cisco!
University of California at Berkeley Medical Case
This case was built for the athletic department of the University of California At Berkeley. The case is designed to be rolled out on the sideline and left there for the duration of the event so the trainers can have access to their medical equipment in case of an emergency. The case features 6 large yellow plastic bins with removable dividers to hold items, as well as 5 drawers, a plastic container holding bins to contain small items, a long compartment for crutches and 2 general storage compartments. Each of the wooden drawers is mounted on heavy duty Accuride drawer glides and features a network of removable dividers to allow the user to customize the drawers for years to come.
Ampeg SVT-CL & 810 Cabinet Cases
These cases were built for the back line division of Mohegan Sun casino. Each case is built out of 3/8" plywood laminated with both neon green and black abs laminates. The cases are designed for both the amp head and the cabinet to "live in" each case, the head remains in its tray and the cabinet remains in its outer case. The portion of the cases that the equipment remains in are laminated with black abs plastic to minimize distraction while the gear is being used on stage. The lids of each case are laminated with neon green abs, to increase visibility to reduce the threat of theft.
Custom Avid Venue Profile Case
This case was built for Michigan based sound company Pro Audio Inc. The case features a removable nose piece allowing access to the front of the console. The removable nose design also allowed us to integrate a slide out shelf under the console for a keyboard. The design also incorporates storage areas for 2 flat panel monitors in the lid of the case. Each compartment is lined with Class A foam to prevent scratches to the screens of the displays.
University Of Georgia Locker Room Entertainment System
This case was built for the University of Georgia by the S.I. division of LM Cases. The athletic department came to LM Cases with the idea of having a mobile entertainment center for their players when the team was on the road. The case features a 32" Panasonic LCD monitor, Nintendo Wii, Sony PS3 and a Panasonic 5.1 sound system with iPod dock & DVD player. The exterior case is constructed out of 3/8" plywood laminated with red abs plastic, and features table legs in both lids and 4" Colson casters.
WWE Computer IT Workbox
This case was made for long time LM Cases customer World Wrestling Entertainment. The case is designed to house support equipment for WWE's touring IT department. WWE chose to build the case using 1/2" composite panels to allow for easier global touring. By not using traditional plywood panels, the risk of unintentionally transporting wood burrowing insects was eliminated. Even the wheel pad was made from 1/4" thick aluminum versus the standard Birch plywood. The "zero wood content" option helps them get through customs much quicker without the need for fumigation.
PRG Audio Workbox
This case was made for the Production Resource Group (PRG). The workbox is made from 1/2" plywood and features 6 carpet lined drawers and a fold away work table. The table is mounted in the lid of the case using ratcheting support arms that allow the table to be mounted at any angle. The work surface of the table is laminated with black formica.
Interpol Playback Rack
This case was made for the band Interpol. The case is built to hold 2 Apple MacBook Pro computers as well as rack mounted equipment. The computers sit on a Comatex plastic work surface to allow for heat dissipation, the work surface also features 2 cable passages to the rack section. For security reasons, there are to D-Ring shackles mounted in the rack section which allow for the computers to be tethered via a security cable.
WYSE Thin Client Terminal Case
This case was built for John Hagee Ministries - IT Department. The case is a double hinged work station (T-Style lid closure), allowing storage for four sets of point of sale stations and 1 drawer per side of the case for a total of 8 groups of workstations & 2 drawers per case. Each group of items includes a Dell point of sale computer, a WYSE Thin Client PC, a WYSE Mobile Thin Client laptop and two bar code scanners (group shot pictured below).
Mackie SRM350 Speaker Case - Pelican 1690
This is a Pelican 1690 waterproof case with a custom foam insert for 2 Mackie SRM 350 speakers. The foam insert is designed to provide individual compartments for each speaker, while matching the draft and corner contours of the Pelican 1690. The case is designed with rental applications and working bands in mind. The case allows the speakers to be transported in wet environments such as pick up trucks and trailers. It also provides a water proof shelter at outdoor events should the speakers need to be put away quickly due to inclement weather.
Presonus 16.4.2 StudioLive Case w/Tilt N’ Travel Option
This design is based off our standard ATA case for the Presonus StudioLive, and adds our Tilt N' Travel option. The Tilt N' Travel option is comprised of a multi stage telescoping aluminum handle and inboard dolly casters allowing the case to be rolled like a piece of luggage. Our Tilt N' Travel design is very durable and designed to be on the road. All wearable parts such as the handle and wheels are designed to be replaced in the field. We custom fabricated mounting plates to use behind the wheels allowing the wheels to be attached via a common 10/32" rack screw. The telescoping handle also follows this protocol, both parts are replaceable in the field using common items unlike many other designs that feature riveted parts that can only be replaced by the manufacturer if the end user does not have access to a riveter.
Custom Pelican 1600 “Rack In A Box”
Sometimes you just don't need a big heavy shock rack! For the situations when you only have 1 RU or 2 RU of gear and a few peripheral items LM Cases developed the "Rack In A Box". We start with a Pelican 1600 case and custom foam insert to hold a 1 RUrack shell. The rack shells are built from 1/2" Baltic Birch that is black painted and outfitted with front and rear rack rails. The rack shells are designed to rest on foam blocks in the Pelican case allowing for an open storage space under the rack shell. You also have the option to custom cut the interior to fit your specific application.
Univ. Of Louisville Helmet / Shoulder Pad Sideline Trunk
This case was built for the University Of Louisville. The case features aluminum rods used to hold 7 shoulder pads. The right side of the case has 9 black carpet lined compartments for general storage. The case features 3 drawers mounted on heavy duty Accuride drawer glides. The bottom 2 drawers are lined with black carpet, the top drawer features dividers and a clear Lexan lid.
Large Format Portable Server Rack
This case was built for John Hagee Ministries IT Department. The case is built out of 1/2" plywood and features a 1/2" shock mounted inner rack. The rack features a 40" deep shell as well as front and rear captive nut box rail to accommodate the deep server units.