Microphones
Professional Wireless PWS LPDA Antenna Case w/Combiner Rack
This case is designed to hold 2 PWS LPDA antennas, and features a removable 2RU rack shell. The antennae are held in a custom CNC cut foam insert that hold them in a nested configuration. The antenna compartment is separated from the rack via a pieces of 1/4” marine grade plastic, this prevents the antennae from rubbing against the bottom of the rack shell. The rack shell is built out of 1/2” Baltic Birch plywood and is finished with black texture coating. The shell features 10/32” pre-tapped front & rear rack rail. Each set of rails is recessed .75”, and has a rail to rail rack-able depth of 11.75”. All the interior components are held in a Pelican 1620 waterproof case.
Installed Brahler Microphone Workbox
This case was designed to be an installed workstation for Conference Systems. The case holds 40 Brahler TMD/01 gooseneck microphones, D-Doc and D-Mic bases in 9 custom drawers. The case lives in a venue and never sees road use, all drawers are held closed by 2 hinged panels secured with large valance spanning latches.
Waterproof Compact Microphone Workbox
This case is designed with the traveling sound engineer in mind. The case holds a basic mic kit in a waterproof Pelican 1510 case which is small enough to be carried on commercial flights, and durable enough to be checked as baggage. 12 circular cut outs hold SM57/58 microphones in the center of the CNC cut foam insert. There are individual compartments for a Shure Beta52 and a Beta91, although the compartments are specifically tailored to these mics; they are generic enough to accommodate a variety of larger low frequency mics. A condenser mic compartment is sized around longer mics like a SM81 and can fit multiple units. The DI compartment perfectly holds 3 Radial DI’s or 4 Whirlwind IMP’s. The accessory compartment holds rim mounted drum mics and assorted clips and adapters.
Microphone Tech Workbox
This case was designed for Loyola University to hold microphones and stands for their event services department. The workbox holds an assortment of mics, stands and components allowing the Event Services department to bring a singular workbox that holds all their equipment to events.
Audio Technica 4050 Stereo Pair Mic Case
This case is designed to hold 2 Audio Technica 4050 microphones and shock mounts in a waterproof case. The mics and shock mounts are held in a custom CNC cut PE foam insert that contours each items shape.
Shure ULXD4Q 4 Channel Wireless System Case
This case was designed for Starway Productions to hold their 4 Channel Shure ULXD4Q wireless microphone system. The 1RU receiver is held in a 1/2" Baltic Birch inner rack shell that is finished with black texture coating. All system components are held in a custom CNC cut foam insert: each hand held mic has its own compartment while the lav beltbacks are stored in joining compartments that allow their antennas to share the same space while keeping the packs isolated. There are also individual compartments for each battery and the systems antenna's. The entire system is held in a Pelican 1610 waterproof case.
Electro Voice R-300 Wireless System Case
This case was designed to hold four Electro Voice R-300 wireless systems compromised of receivers, hand held microphones, lavaliere microphones, batteries and cables. All components are held in a custom CNC cut foam insert.
Waterproof Coles 4038 Microphone Case
This case was designed for Washington & Lee University for a Coles 4038 mic. The mic is cradled in a custom CNC cut foam insert that contours the mic and attached stand mount at different elevations to ensure maximum protection. The foam insert also accommodates the 4069 3 pin to XLR adapter. The foam insert is housed in a Pelican 1300 waterproof case.
Yamaha Subkick Case
This case is designed for the Yamaha SKRM-100 Sub Kick. The Sub Kick and stand are held in a custom CNC cut foam compartment. The stand compartment is designed to hold the collapsed base and mount as one unit.
Line 6 XD-V70 Wireless Mic Case
This case was designed for the Audio Visual Professional Group. The case holds a Line 6 XD-V70 wireless mic system in a custom CNC cut foam insert. The insert holds the microphone in its factory case as well as the receiver, antennas, power supply & cables.
Shure ULX/P Wireless Mic Case
This case was designed for Visual Aids Electronics. The design is based around a Pelican 1550 case, the case features a custom CNC cut foam insert to hold the wireless system. Each component of the system is held in a custom foam lined compartment. This allows both VAE and their customers to realize if a piece of the system is missing before sending or returning the case to and from a rental.
Custom LM Cases Mic Trunk
This case was built using our Econo #2 design. The case features a removable tray with a custom CNC cut foam insert to hold 8 Shure SM57/58's, 3 Shure Beta98's, 4 Shure Beta91's, 1 Shure Beta 52, 2 Sennheiser MD421's, and 4 Radial JDI's.
King Of Comedy Steve Harvey Chooses LM Cases For Mic Case
This case was built for the Steve Harvey Morning Show. The case is designed to hold 6 Shure SM7B microphones and 9 Sony MD7506 headphones. The case is built around 2 removable trays with storage underneath each tray for mic stands and cables. The mic tray features a custom CNC cut insert to hold each mic in its own foamed compartment. The headphone tray features a divider network made of Comatex plastic. The compartments under each tray are black carpet lined for misc. storage.
Compact Live Sound Microphone Case
This case is designed for live sound microphones. The case features a custom CNC cut PE foam insert. The insert features 6 main compartments for handheld mics. These compartments are 2” wide x 8” deep x 5” tall. Each compartment comes with 2 removable ½” PE dividers. These dividers can be placed at the bottom of the compartment when not in use, or when only a single mic needs to be stored. The dividers are designed to separate mics when several units are needed to be placed in a compartment. The foam insert features 2 large compartments that are 8” wide x 3.5” deep x 5” tall. These 2 compartments are designed for larger mics and or clip style drum mics.
Shure UA870WB Wireless Paddle Antenna Case
This design accommodates 2 Shure UA870WB short wave antennas in a custom CNC cut foam insert. The case also features a 1RU rack to hold an antenna combiner. A hard mounted hinged flap is included to hold the antennas in their compartment and prevent them from contacting the rack bottom during transport. The foam insert and rack are mounted in a Pelican 1600 case.