Musical Instruments
Orange AD200B Bass Amplifier Case
This case is designed for the Orange AD200B bass amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp head. The lid is removable with the amp living in the case tray. The lid features 3 deep recessed handles and 4 large, recessed latches. The case is built from 3/8” plywood laminated with your choice of ABS plastic colors.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Sequential Prophet 10 Analog Synth Road Case
This custom road case is designed for the Sequential Prophet 10 analog poly synth. The keyboard is held in a custom 1” PE foam lined compartment. A 3.5” Ester foam block is mounted in the lid to softly touch the keys and hold the synth in place during transport. A carpet lined accessory compartment is provided for additional storage.
Custom Road Case For Gibson SG Guitar
This custom flight case is designed to fit a Gibson SG electric guitar. The case is constructed from our XL Series aluminum. This aluminum features tongue and groove built into the extruded shape for a very tight, and secure seal between the lid and the tray. The case interior is custom cut from Ester foam and contours the shape of the guitar body. Crucial stress points of the guitar are supported with additional foam blocks. All interior foam is wrapped with purple crushed velvet. A custom accessory compartment with a hinged door is provided for additional storage.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Roland DJ707M USB Controller Road Case
This case is designed for the Roland DJ-707M Serato DJ Controller. The case features a pull over lid allowing the controller to remain the case tray during a performance. An accessory compartment is provided under the controller for the power cable and other misc items. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case hardware includes 2 recessed latches, a slim line recessed handle, and medium ball corners.
Korg Minilogue Synth Road Case
This transport case is designed to hold the Korg Minilogue synthesizer. The case features a custom CNC cut, PE foam interior. The synth is supported from the bottom by custom angled foam blocks that grab the unit by the sides. Angled foam blocks are also included in the lid to hold the synth down during transport. A compartment is provided under the synth for its power supply.
Novation Bass Station II Synth Road Case
This case is designed to hold the Novation Bass Station II analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 1 surface mounted handle is provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors. The plywood panels are wrapped with our XL Series extrusion with integrated tongue and groove for a light weight, and durable exterior.
Moog Subsequent 25 Analog Synthesizer Road Case
This case is designed to hold the Moog Subsequent 25 analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 3 recessed handles are provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors.
16” x 16” Floor Tom Drum Road Case
This case is designed to hold a 16” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with light blue ABS plastic. The case features 3 recessed handles and flat triangle corners.
14” x 14” Floor Tom Drum Road Case
This case is designed to hold a 14” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
12” x 10” Rack Tom Drum Road Case
This case is designed to hold a 12” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
10” x 9” Rack Tom Road Case
This case is designed to hold a 10” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
8” x 8” Rack Tom Road Case
This case is designed to hold a 8” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
40 Capacity Music Stand Transport Case
This case was designed for the Salvation Army band to hold 40 music stands. The case features a custom divider network that holds each stand in an individual compartment.The case interior is lined with ½” PE foam, and features a divider network built from ½” marine grade plastic. Each compartment has usable dimensions of 3” x 3” x 17”.The exterior case is built from 3/8” plywood laminated with silver ABS plastic. The case features a pad locking hasp latch, and 4” Colson casters.