Musical Instruments
Axis Longboard Double Pedal A-L2 Case
This case is designed for Axis Percussion Longboard A Double Pedals. The pedals are held in a custom CNC cut foam insert. The foam insert is designed to hold each of the pedals and both beaters in separate compartments. The insert is designed with durability in mind, the bottom of each pedal compartment features a piece of 1/4″ black plastic to prevent the velcro on the bottom of the pedals from ripping the foam over time. The case is built out of 1/4″ plywood to provide maximum protection at a minimum weight. The exterior case features 3 recessed handles.
Yamaha Subkick Case
This case is designed for the Yamaha SKRM-100 Sub Kick. The Sub Kick and stand are held in a custom CNC cut foam compartment. The stand compartment is designed to hold the collapsed base and mount as one unit.
Custom Novation/Akai DJ Controller Case
This case was designed for Nate Edwards, DJ extraordinaire at Sweetwater. The case is based around an Apple iPad 2, which serves as the sound module of the rig. Control is provided by 2 Akai LPD8's and a Novation Nocturn. These items are held in a custom foam insert which allows all the items to remain in a user friendly position and wired together. In order for all of the equipment to remain flush with the top of the insert, we cut custom angled foam blocks to match any contour in the gear; a picture of the angled foam blocks under the Novation Nocturn is shown below. The case lid features custom angled foam blocks to contour each piece of gear so they will stay secure in the foam insert no matter how the case is transported. The foam insert sits on an angled rack which has 1RU in the front and 2RU in the rear and features a removable bottom for easy wiring. The 1/2" Baltic Birch rack is finished with a black textured coating, and can be used at a stand alone unit or used in the case tray.
Fender Jazz Bass ATA Case
This case was built for Air Force Entertainment. The case holds a Fender Jazz Bass in a custom CNC cut foam insert lined with black crushed velvet. The case interior features an accessory compartment and an adjustable neck block to accommodate Jazz Basses from different eras with different necks.
Motion Sound Pro 145 “Live In” Flight Case
This case was designed for the touring production of Shrek. The case holds the Motion Sound Pro 145 in a 2" foam lined compartment. The rear of the case features 2 cable hatches to allow access to the power cable as well as the DI - XLR's. The "live in" style case is great for players who want protection for their amps during the performance.
Gretsch Catalina Jazz Drum Cases
These cases were designed to individually fit the Gretsch Catalina Jazz kit. Each drum case is built out of 1/4" plywood and lined with 1/2" foam to keep the cases as light and small as possible. The cases also feature flat triangle corners so they can stack when loaded and nest inside each other when they are empty.
Alesis DM5 & Control Pad Electronic Percussion Case
This case was designed to hold an Alesis DM5, Alesis Control Pad and all the necessary support cables to power each device. The Alesis DM5 is mounted into a custom built rack shell that features the mounting post for a Roland APC-33 clamp, both the Control Pad & the DM5 rack feature the Roland APC-33 mounting post.
Custom ATA Drum Hardware Case
This case is built out of our proprietary 1/4" composite panels laminated with stucco aluminum. The case features 4 black carpet lined compartments for hardware storage, inboard dolly casters, custom black rivets and a custom silkscreen of the customer's logo.
Silvertone 1484 Twin Twelve Amp Case
This case was designed for the Silvertone 1484 Twin Twelve guitar amp, the case accommodates the speaker cabinet with the amp head stored inside. The exterior case is built out of 1/4" plywood and is laminated with forest green ABS plastic. The case features 2 recessed handles and rides on 3.5" casters (2 locking + 2 non) with a full 3/4" Birch caster pad.
Custom Doerr Acoustic Guitar Flight Case
This case was designed to hold a custom one of a kind Doerr guitar in its factory case. Our customer needed a safe way to ship his acoustic guitar via ground freight or tour bus to venues. The case within a case design allows the guitar to be shipped to a hotel in its outer flight case, once at the hotel the flight case can be left in the room and the factory molded case can be utilized for around town use. This concept also works for tour busses, the larger flight case can be stored below in the storage bay and the factory case can be used in the passenger area.
Ampeg SVT CL Head Case
This case was designed for Atomic Professional Audio for their backline department. The case is built out of 3/8" plywood laminated with charcoal ABS plastic and features deep recessed handles and 3.5" Colson Casters. The case is designed to fit all models of Ampeg SVT heads.
Marshall JCM 800/900/2000 Head Case
This case was designed for Atomic Professional Audio for their backline department. The case is built out of 3/8" plywood laminated with charcoal ABS plastic. This case is designed to hold a Marshall JCM 800, 900, or 2000 head, with the units foot switch. The case features 3 upgraded deep recessed handles.
Fender Hot Rod DeVille 212 Case
This case was designed for a Fender Hot Rod Deville 212 amp. The case is built out of 3/8" plywood and features a 1" foam lined interior, deep recessed handles and 3.5" Colson casters.
Yamaha Motif 8 Case
This case is designed to hold a Yamaha Motif 8, and sustain pedal. The case is built from 3/8" plywood and features a foam lined compartment for the keyboard and a carpet lined compartment for the sustain pedal/accessories. The case also features inboard dolly casters to make it easier to move.
Fender Acoustasonic Junior DSP Amp Case
This case was made for the Salvation Army Band. This Surface Hardware series case is built from 1/4" plywood and features a 1" foam lined interior and 3.5" Colson casters.