Products
Moog Subsequent 25 Analog Synthesizer Road Case
This case is designed to hold the Moog Subsequent 25 analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 3 recessed handles are provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.
Antari M7 Stage Jet Fog Machine Case - 4 Capacity
This case is designed to fit four Antari M7 fog machines. Each machine is held in a custom CNC cut foam insert that contours its shape including the wireless receiver, safety shackle, and handles. A 3.5” deep carpet lined accessory compartment is included for misc. items like True1 Cables, safety tethers, and clamps.
6 Space Preview Monitor Shallow Rack
This rack is designed to hold shallow equipment such as rack-mounted broadcast preview monitors and battery chargers. The rack features front rail that is recessed ½” from the lid split. Pre-tapped 10/32” rack rail is provided for easy installation. 1 lid mounted recessed handle is provided for transport.
16” x 16” Floor Tom Drum Road Case
This case is designed to hold a 16” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with light blue ABS plastic. The case features 3 recessed handles and flat triangle corners.
Half Rack Width Quad Fiber / Powercon / Cat 6 IO Panel
This custom half rack width IO panel was built for Disney to provide external connectivity to an audio rack.
14” x 14” Floor Tom Drum Road Case
This case is designed to hold a 14” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
12” x 10” Rack Tom Drum Road Case
This case is designed to hold a 12” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
3RU Heater Control Rack Mount Panel
This panel is designed to be the master control center for a football heater case. The panel is 3RU tall and built from .125” brushed aluminum. The system has 2 temperature zones controlled by 2 thermostats. Each thermostat is back mounted to the panel via a custom bracket designed to fit into the thermostats DIN rail mount brackets. Standoff’s are provided to firmly mount and secure each thermostat’s temperature probe wire.
10” x 9” Rack Tom Road Case
This case is designed to hold a 10” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
Tonelux JC37 Stereo Pair Microphone Flight Case
This case is designed to hold 2 Tonelux JC37 microphones, the power supply, and the IEC cable. The foam insert is built from PE foam that is custom cut to contour each item. The microphones are located at the sides of the foam insert. Their tethered cables are pathed through the sides of the insert and stored below the power supply. A separate compartment is allocated for the IEC cable. Check out LM Tour System’s upgraded locking IEC cables for mission critical applications. The exterior case is built from LM’s XL Series aluminum. This series is based around custom mitered aluminum wrapped around ¼” plywood panels. The aluminum has integrated tongue and groove for a very strong seal. Surface mounted twist latched and a spring loaded handle are provided.
8” x 8” Rack Tom Road Case
This case is designed to hold a 8” rack tom drum. The case interior is lined with ½” PE Foam. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
Shure Microflex Wireless System 10 Capacity
This case is designed to hold 10 mics and bases from the Shure Microflex wireless system. A removable tray holds 10 Shure MXC4200DF microphones in a custom CNC cut foam insert. Each of the MXCW640 bases are held in individual compartments below the tray.
Klang Fabrik Portable In Ear Monitor Work Station
This workstation is designed to hold the Klang Fabrik processor with all associated Shure Axient in ear components and a Dell touch screen monitor.
Road Case Style Wall Frame For LP Vinyl Record Album
A perfect way to display your favorite albums! Each frame is hand built one at a time in our shop in Youngstown, Ohio. The album frame is built out of flight case grade aluminum and features mini ball corners. The frame features an inner lip that allows you to use standard wall hangars. This is a must-have for the serious record collector and music enthusiast!