Products
LM Tour Systems LMAB 12v, 2RU LED Rack Light Enclosure w.Flexible Task Light
This power supply is built by the LM Cases Custom Integration department to provide a central source for lighting and control in integrated systems. The front panel features an 18” dimmable, flexible, LED task light. 2 switches are provided to allow switched control over 2 banks of lights.
Light Weight Road Case For Midas M32R Console
This is a custom, light weight case for the Midas M32R console. The console is protected by 1” Ester foam on all sides. Custom blocking is positioned at the palm rest and rear of the console to ensure proper protection when the case is flipped at any angle. An accessory compartment is provided under the console for additional storage.
Allen & Heath C3500 Mixer Road Case - Medium Duty
This medium-duty flight case is designed for the Allen & Heath C3500 control surface. The case interior is lined with 2” PE foam. The console is held in place via custom foam blocking and by its feet. Foam blocks are located behind the console to space the rear connectors off the back of the case wall.
Allen & Heath C3500 Console Road Case - Tour Grade
This heavy-duty flight case is designed for the Allen & Heath C3500 control surface. The surface is held in place during transport via custom CNC cut, non-abrasive, Crosslink foam side blocks. These side blocks match the console’s contours and shape, these prevent it from sliding during transport and loading on console stands. To further keep the console in place, a ¼” marine grade plastic locator is provided to trap the console by its feet to ensure proper mating to the lid foam blocks and doghouse.
12 Space Studio Outboard Rack - 18” Deep Shell
Our standard series of studio racks are designed for outboard processors, interfaces, wireless mics, and any rack mount peripheral. The front rails are recessed 1” to allow for any handles or knobs. The rear rail is recessed ½”, with a rail to rail dimension of 16.5”. The 27” max height will still fit under most desks.
12 Space Studio Outboard Rack w/22” Deep Shell
The deep series of studio outboard racks are designed to accommodate larger items like computers, drawers, and amplifiers. This rack shell features 22” between the front & rear rails. The 27” max height will still fit under most desks.
Custom Cut Rack Drawer Foam For Shure P10R+ Bodypack Receivers - 10 Capacity
This custom CNC cut PE foam insert is designed to hold 10 Shure P10R+ bodypack receivers. The insert orientates the receivers on their sides to allow 10 to fit in a 15” deep, 2RU drawer. This insert is designed to work with Middle Atlantic D Series, and Penn Elcom 32 series drawers.
Behringer X-Touch Universal Control Surface Case
This case is designed to hold the Behringer X Touch Universal Control Surface. The controller is held in a custom CNC cut 1” PE foam interior. Hand slots are provided at the left and right side of the controller for easy removal. An accessory compartment is located below the controller to hold the power and signal cables. The case features 1 large grip surface mounted spring loaded handle and 2 HD surface mounted latches.
Ampli Falcon Patriot Shipping Road Case
This is a heavy-duty transport case designed for a Amplivox Falcon Patriot SN3046 or ST3046 lectern. The case interior is lined with a smooth, non-abrasive, Crosslink foam. This foam is designed to protect the lectern and will not damage the lectern’s fabric. White .125” HDPE plastic is laminate to the bottom foam allowing the lectern to slide in, and out easily.
16 RU Pocket Door Amp Rack
This case was built for the production department at the Kennedy Center. The 16-space rack features an OD depth of 24” x 30”.
55” Fully Integrated Installed Confidence Monitor System
The LM Cases 55” Fully Integrated Confidence Monitor System is a turnkey video display solution built around a 55” Sony 4K monitor, fully installed and ready for immediate use. Designed for touring, broadcast, and live production environments, the system features a rugged road case, integrated power and signal I/O, and professional-grade mounting and protection for reliable deployment in demanding applications.
6RU Installed Rack Shell - 12” Deep
This rack shell is designed for use on table tops where a traditional flight case is too bulky, or not aesthetically pleasing. The rack shell can be used for fixed installations, or packed in a larger exterior case. Perfect for video equipment, network switches, test equipment and audio interfaces. The rack is built out of ½” Baltic Birch plywood finished with black texture coating. All edges are routed with any and all voids filled. The rack features 2 black spring loaded recessed handles, pre-tapped 10/32” rail, and four large rubber feet.
Confidence Monitor I/O Enclosure Box w/2 Blank Punches
This is the standard IO box we use for our confidence monitor caddies. The box is designed for customers who are only using a single video input source with their system. The box features a laser etched, text “video” label above the left d-punch. The right punch features a white blank box allowing users to either write a label or use a label machine to notate the connector. The right punch comes standard with an anodized blank plate. D-series connectors are available from LM. Don’t forget to complete your system with a HD LM Tour Systems power cable!
Compact Carry On Resolume Media Server Kit
This portable playback system is designed around our 2 Space Airline Carry On Rack. The system is designed to be the interface portion of a Resolume media server system for a hip-hop artist. The compact format allows the tour’s playback tech to carry the system on any commercial or private airplane.
55” Low Profile Confidence Monitor Case System
This confidence monitor system was designed for low profile operation. The 55” monitor is mounted at a 30-degree angle allowing for a flatter viewing position vs our traditional confidence monitor systems.