Products
1:3 L5-30 Power Distribution 2RU Enclosure
This 1:3 L5-30 splitter panel is designed to take a single L5-30 input and distribute power to 3 L5-30 outlets. This distribution box is perfect for server racks that need to split input power to multiple PDUs or uninterruptable battery backups. The front HBL2615 inlet features a LED light to show when power is present. 3 HBL2616 outlets are provided for power output. The front face panel is built from HD .125” thick black anodized aluminum. The panel is 2U tall, with a 6” deep back box. Add a LM Tour Systems L5-30 custom built power cable to your enclosure for a turn key system!
Road Case For Shure SM7b Microphone
This case is designed to hold the Shure SM7b microphone, and large A7WS windscreen. The custom CNC cut PE foam interior is designed to hold the microphone with the RK345 windscreen attached. The case exterior is built from custom bent aluminum extrusion. The aluminum extrusion has built in tongue and groove to ensure strong alignment between the lid and case body. ¼” plywood panels laminated with your choice of ABS plastic colors make up the case top and bottom. A HD spring loaded handle allows for easy transport.
4 Space Studio Outboard Rack 18” Deep Shell
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 16.5” of rackable depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
DSK-AC Courtesy Power / USB Outlet Recessed Box
This outlet box is designed to provide courtesy AC and or USB power to work surfaces. The box can be recessed into a work surface, drawer or panel. The box is built from .125” black anodized aluminum. Power is provided by 16/3 HD SO power cable that is custom cut to your specification and terminated with a HD Edison AC plug. A custom heat shrink label is provided with the text of your choosing. 5 outlet options are available: 20amp HD duplex, 4 USB A outlet bank, duplex w/dual USB A, duplex w/dual USB C, and a duplex w/USB A & C.
Digico S31 Console Road Case With Doghouse
This case is designed to hold the Digico S31 console. The console is held in place via custom foam blocks. Crosslink foam blocks contour the shape of the console’s built-in monitors. The case exterior is built from 3/8” plywood laminated with your choice of ABS colors. The case rides on 4” Colson casters and features 10 deep recessed handles.
GrandMA3 Light Console Road Case
This case is designed for the MA Lighting GrandMA 3 Light console. The console is held in a custom CNC cut; PE foam lined interior. Custom arch shapes are cut into the foam to protect the console’s screen hinges. A custom ½” marine grade plastic keyboard drawer is provided under the console for additional storage.
Waterproof Transport Case For Cisco WebEx DX80
This case is designed to hold the Cisco WebEx DX80. The case features a custom CNC cut PE foam insert that holds the unit. A custom cutout is provided for the external mounted camera. Cutouts are also provided to accommodate the DX80’s stand allowing it to remain attached during transport. A 15” x 5” accessory compartment is provided for additional storage.
Vinten Vector 750 Pan/Tilt Head Road Case
This case is designed to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut, PE foam insert that is designed to contour and support the unit. The case is designed with broadcast truck packs in mind; ½” marine grade plastic is positioned at all high stress internal points allowing the case to be flipped. The foam insert includes 1.625”, and 1.125” diameter holes for arms.
MA onPC Command Wing / Fader Wing Flight Case FOH Workstation
This case was designed to be an all in one, pre-wired workstation for MA Lighting, onPC Command Wing, and Fader Wing controller. The case holds each of the control surfaces in place via custom brackets that contour each of the unit’s shape. Touch screen monitors are mounted on HD Ergotron arms, allowing multiple placement options. Custom rack mount panels provide access to all necessary connections.
Double Wide Pocket Door Craft Services Show Amenities Work Box
Designed for Paradise Productions, this 0.500 ATA double wide pocket door Comfort Case integrates craft services, office functionality, and portable site networking into a single touring-grade platform. Dual True1 power inputs feed a segmented distribution system with real-time load monitoring, while a 12-space rack section houses enterprise networking infrastructure for wired and wireless connectivity. Integrated appliances, pull-out printer access, structured drawer storage, pop-up workspace, and compartment-level LED lighting are engineered for organized deployment and controlled operation in live show environments.
Dual Circuit True1 Power Distribution Unit w/Hydraulic Breakers
This is a perfect power input panel for systems requiring dual 20amp power inputs from separate sources, the panel can also be beneficial as a master power switch for 2 separate systems when utilizing the breakers as “on/off” switches. Power enters the panel via the True1 jack and is routed through the breaker, then to 2 duplex outlets. The 20amp breaker protects the system from over drawing and or power surges.
The rack chassis is built out of thick .125” brushed aluminum and black anodized. All labels are laser etched.
Check out LM Tour Systems line of custom True1 power cables to compliment your new distro!
MA Lighting Grand MA 3 Full Size Console Road Case
This case is designed for the MA Lighting GrandMA 3 Full Size console. The console is held in a custom CNC cut; PE foam lined interior. Custom arch shapes are cut into the foam to protect the console’s screen hinges. A custom ½” marine grade plastic keyboard drawer is provided under the console for additional storage.
Korg Minilogue Synth Road Case
This transport case is designed to hold the Korg Minilogue synthesizer. The case features a custom CNC cut, PE foam interior. The synth is supported from the bottom by custom angled foam blocks that grab the unit by the sides. Angled foam blocks are also included in the lid to hold the synth down during transport. A compartment is provided under the synth for its power supply.
Large Format Event Tech Workbox
This workbox was designed for Studio 46 as a configurable way to store tools and equipment for large events. The workbox features 8 drawers with 4 unique heights. A 6-lid storage unit is mounted in the lid for smaller items.
Roland V800 Video Flypack Workstation w/Articulating Monitor Arm
This case was built for Headline Productions as a central video processing system for corporate events. The system is based around a Roland V800 video switcher. The flypack features Dell H2418T touch monitor mounted on a custom-built articulating monitor arm. A shock mounted 16U rack section is included for equipment.