Racks
4 Space Half Width Outboard Rack
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 11” of rack-able depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
2 Space Studio Outboard Rack
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 11” of rack-able depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
4 Space Studio Outboard Rack
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 11” of rack-able depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
Oxygen Event Works 4RU Pull Over Rack
This case was built for Oxygen Event Works for video processing equipment. The case features a removable 4RU inner rack shell and an independent foam lined exterior case.
Mac Pro Video Workstation
This case was designed for the University Of Wisconsin to hold an Apple Mac Pro tower, accessories and rack mounted equipment for a portable video conferencing system. The case features flat panel lids on the front and rear to make accessibility quick and easy.
Pelican 1600 1RU Rack Flypack
This case was designed for Starlight Visuals to hold a custom time code sync clock. The design features a 1RU rack with a removable bottom panel, and a signal and power panel built by the LM Cases Custom Integration department. The rack is held in a Pelican 1600 case with a custom CNC cut foam insert.
Disney Portable Network Rack
This case was designed for Walt Disney World to provide a portable network hub for audio and lighting throughout their park. The equipment as well as the rack was built and integrated by our in house Custom Integration department.
Voyage Productions Media Server Kit
This media server kit was designed for Voyage Productions, the kit is based around a cylindrical Mac Pro tower housed in a 6 space rack. The Mac Pro connections are addressed via a custom IO panel built by the LM Cases Custom Integration Department. The rack is transported in a Pelican Storm iM2975 case.
Sonnet RackMac Pro Flypack Case
This flypack system was designed for the Farm League. The system is based around a Sonnet MacRack Pro mounted in a 6RU rack housed in a Pelican 1630 case.
Yamaha Rio 3224-D Modular Rack System
This case was designed for AVI-SPL to house their Yamaha RIO 3224-D interfaces to provide IO for their CL5 system. The case is built around 2 removable 8RU racks that house the 5RU RIO units with room for future expansion.
Barco Folsom Image Pro4 Case
This case was designed for a Folsom Image Pro in a single rack space removable shell. The rack shell is built from 1/2" Baltic Birch finished with black texture coating.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
12RU Pocket Door Amp Rack
This case was designed for Oxygen Lightworks for D&B D12 amplifiers. The case features pocket style doors that are designed to open and fold back into the sides of the case on heavy duty glides. Pocket Door racks save time during set up and provide an excellent solution to the age old problem of what to do with your case lids. The inner rack shell is fully shock mounted and is 24" deep rail to rail to accommodate the amplifiers as well as power distro units. The exterior dimensions are 24" x 30" to fit into standard truck pack configurations. The case is built out of 1/2" plywood and features 4" Colson casters, deep recessed handles and stacking caster wells.
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
Waterproof Half Width Rack Case
This case is designed to hold half width rack mounted components like wireless microphones, recording interfaces and processors. The rack portion of the case is built out of 1/2" baltic birch plywood and features front & rear rack rail. The rack is finished with our black textured coating. The exterior case is a Pelican 1560 with a custom CNC cut foam interior. The case is completly waterproof and features a retractable handle and wheels.