Racks
16 Space Shock Mount Rack w/Table Legs In Front & Rear Lids
This is a modified version of our standard series 16 space shock mount rack with table legs added to each lid built for T-Mobile.
Analog Way RS1 Video Processor Pocket Door Rack w/Custom LED Logo Lights
This case was built for Paradise Productions for their Analog Way RS1 video processing system. The case features a 10u rack section, 2 drawers, pocket doors and custom routed LED lights of the Paradise Productions logo.
Triple Wide Pocket Door Rack w/Modular Rack Shell Storage
This triple wide rack transport case was designed to hold 5 – 6RU modular rack shells, in addition to 2 built in 18RU rack frames and a storage drawer. The front of the case features 3 pocket doors and 2 large doors that fold flat against the sides of the case during use.
4 Space Studio Outboard Rack 18” Deep Shell
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 16.5” of rackable depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
12 Space Studio Outboard Rack - 18” Deep Shell
Our standard series of studio racks are designed for outboard processors, interfaces, wireless mics, and any rack mount peripheral. The front rails are recessed 1” to allow for any handles or knobs. The rear rail is recessed ½”, with a rail to rail dimension of 16.5”. The 27” max height will still fit under most desks.
12 Space Studio Outboard Rack w/22” Deep Shell
The deep series of studio outboard racks are designed to accommodate larger items like computers, drawers, and amplifiers. This rack shell features 22” between the front & rear rails. The 27” max height will still fit under most desks.
16 RU Pocket Door Amp Rack
This case was built for the production department at the Kennedy Center. The 16-space rack features an OD depth of 24” x 30”.
6RU Installed Rack Shell - 12” Deep
This rack shell is designed for use on table tops where a traditional flight case is too bulky, or not aesthetically pleasing. The rack shell can be used for fixed installations, or packed in a larger exterior case. Perfect for video equipment, network switches, test equipment and audio interfaces. The rack is built out of ½” Baltic Birch plywood finished with black texture coating. All edges are routed with any and all voids filled. The rack features 2 black spring loaded recessed handles, pre-tapped 10/32” rail, and four large rubber feet.
Outer Transport Case For LM 4RU Studio Outboard Rack
This outer case is designed to transport the LM Cases 16-0928 4RU Studio Outboard Rack. The case allows the rack shell to be easily loaded and removed. The shell is supported on all four sides by 1” Ester foam. The corners of the case are open to provide grab points to remove the rack shell. All surfaces not covered by foam are finished with black carpet.
10RU Pocket Door Amp Rack Road Case
Pocket doors racks are designed for touring applications requiring a truck pack sized case with tethered lids. The lids open with a single latch and can be retracted into the sides of the case preventing lost lids and saving storage space. The rack section is shock mounted and features 24” rail to rail usable space. The front rail features adjustable recess points mounted via custom removable bolt plates. The mid and rear rails are adjustable via sliding tracks, all rails can be moved using a simple 1/4" wrench. The exterior case features stacking caster wells allowing multiple racks to be stacked. Also featured are 4 deep recessed handles and Colson 4” x 2” casters.
16RU Studio Outboard Rack w/Casters & Dove Tailed Corners
This rack is designed to be the perfect complement to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch and features beautifully dove-tailed end joints; all edges are rounded, and the rack is finished with a light coating of clear lacquer. The rack features an 18” deep shell. The front rail is recessed 1”, with the rear rail recessed ½”. This allows a rail-to-rail depth of 16.5”. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish. The rack rides on 3.5” casters, with the front 2 locking.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
6 Space Preview Monitor Shallow Rack
This rack is designed to hold shallow equipment such as rack-mounted broadcast preview monitors and battery chargers. The rack features front rail that is recessed ½” from the lid split. Pre-tapped 10/32” rack rail is provided for easy installation. 1 lid mounted recessed handle is provided for transport.
14” Deep Shallow Standard Series Rack - Non Shock Mounted
These shallow racks available in 4-8RU are designed for applications where equipment depth does not require our standard 20” depth shells. Applications include wireless mics, video monitors, and processing equipment. The racks are built from 3/8” plywood laminated with your choice of ABS plastic colors. Thin 1.75” lids create a compact front – back max exterior depth of 19”. Front and rear rack rails are recessed ½” from the lid spits creating a rail to rail mounting dim of 13”. 2 deep recessed handles are provided for portability.
4RU Flying Truss Mounted Rigged Network Switch Rack
This case is designed to be a flying, suspended rack used with PA systems. The rack features a custom welded inner steel frame with 4U of rack height to hold a network switch and a system processor.