Products
Coaches Wardrobe Trunk, 18 Capacity With USB Charging Drawer
This trunk was built for Penn State University for coaches who need to dress from the same wardrobe case. The case features a large hanging clothes section with a HD hanging bar. The clothes section features a trap door on the side allowing users to throw dirty clothes in the side of the closed case at the end of an event. Clothes are contained in the hanging section by a heavy duty ¾” thick clear Lexan door. Below the hanging section are 2 heavy duty drawers for storage of socks and undergarments. The left side of the case features 18 storage compartments for folded clothes and shoes. A charging drawer for 10 devices is provided for storage and charging during events. The drawer’s USB outlets are rated to charge most devices including tablets. Power to the case is provided by a retractable 30ft spring loaded power cable on an enclosed reel. The retractable cable allows the case to be easily powered without the need to carry a separate power cable.
Backstreet Boys Touring Costume Wardrobe Trunk
This case was built to hold costumes for the Backstreet Boys world tour. The case features 2 hanging clothes sections and a storage drawer. The hanging clothes sections each feature a HD aluminum bar for hangers. The bar can be adjusted in 3 positions front to back to accommodate a variety of hangers. The heavy duty storage drawer is built out of ½” Baltic Birch and mounted on HD Accuride glides. The hanging clothes sections and drawer are finished with wood grain laminate.
Portable Game Film Trunk With 60” TV
This case was built for West Memphis High School for portable game films. The case features a 60” monitor installed on a HD tour grade electric lift. The lift is controlled with a hardwired remote control that can either be used in the case or handheld. The monitor is wired to a custom IO box that features Neutrik® HDMI and Cat5 jacks. A recessed Hubbell power inlet is the main input source of power. A 25’ 12awg HD extra hard usage power cable is included.
2RU USB/Edison/Powercon® Power Distribution Unit
This power box is designed to provide 8 courtesy Edison and USB outlets to a work surface or rack. The power box also includes 2 Powercon® output jacks for expansion. Common uses for this box include tech work stations where a variety of power outlets are required. The box is constructed out of 1/8” brushed aluminum that is anodized black. Power is supplied via a 3’ HD SOOW cable terminated with a Hubbell Edison plug.
University Of Nebraska Sports Nutrition Trunk With 50 Quart Cooler
This trunk was designed for the University Of Nebraska Performance Nutrition department. The trunk features a magnetic dry erase white board, and a cork board in the trunk lid. Divided compartments built out of ½” marine grade plastic are located at an ergonomic working height. These compartments are designed to hold food and energy bars for distribution to athletes and staff. 18 total compartments are provided. 4 heavy duty drawers are provided for storage. These drawers are built out of ½” Baltic birch plywood, mounted on HD Accuride glides and finished with black texture coating. A storage cabinet is located at the bottom left corner of the trunk. The cabinet features a removable shelf that can be placed in 2 locations for flexible storage. A 50qt Pelican Elite cooler is also included to keep food cold during transport.
10 Drawer Large Format Production Workbox Case
This workbox was designed for the BackStreet Boys wardrobe department. The workbox features 10 drawers. Each drawer is built out of ½” Baltic Birch plywood, mounted on HD Accuride glides, and finished with black texture coating. A storage compartment is located above the top drawer in each section. The compartment is sealed with a removable ½” Marine Grade plastic lid. The drawers are built into a ½” plywood shell that is independent from the external case.
Snap Attack® / Aerial Attack® Transport Trunk
This case is designed to hold either a Snap Attack®, or Aerial Attack® machine. The stock case comes standard with a Sports Attack® brand universal mount post installed. The user has the option to mount their existing machine to the case, or have LM Cases provide the machine for a turn key system. The case features split top lids that fold down to the left and right side of the trunk. Cargo nets are installed allowing footballs to be stored in the folded down lids during use. A slide out shelf built out of HD marine grade plastic is included to store a generator or the upgraded power cable reel. A gas powered generator is option is offered by LM Cases if you desire a turn key system. The case comes standard with a 50’ retractable power cable. This power cable is spring loaded allowing the cable to be quickly extended and retracted. An optional 125’ HD power cable mounted on a HD steel reel is offered for users who require additional length. The upgraded power option featured a 14awg hard usage outdoor rated power cable on an industrial strength steel reel. The trunk features 2 accessory compartments located below the main work surface. These accessory compartments are large enough to store the factory tripod that comes standard with the machine, allowing all factory parts to be stored with the machine at all times.
Chauvet Rogue R1 Wash Case - 6 Capacity
This case is designed to hold 6 Chauvet Rogue R1 fixtures in a custom CNC cut foam insert. Each fixture is stored lens facing down. The foam securely contours the shape of each fixture allowing safe travel even if the case is flipped. A 5.5” deep x 43.5” wide x 12.5” tall carpet lined accessory compartment is included to hold clamps, power, and safety cables. The case features 4” Colson casters (2 locking), 4 deep recessed handles, stacking caster wells, and recessed lid stays. The case is designed around a 90” truck pack with OD dimensions of 45” x 30”.
Art Gallery Mounting/Installation Work Station
This case was built for the Garth Greenan Gallery as a mobile work station used in art mounting and gallery installations. The case lid features a tilting frame that has 3 rods for mounting paper rolls. The frame is designed to hold 3 rolls of paper that are 6” diameter. For easier access, the frame tilts forward. It is secured with a cable latch with a central pull handle that secures the frame at the left and right side. The case lid is held in position with gas springs.
Dante/Network Power Inlet Box
This inlet box is designed to be a main signal point for work stations and racks using the Dante protocol. The box features 3 Neutrik NE8FDP-B Cat5 jacks labeled “primary”, “secondary”, and “network”. The jacks are intended to bring Dante Primary, Secondary, and a main network signal into a work station. The power portion of the box features a recessed Hubbell inlet wired to a duplex outlet. This box can be mounted behind a Penn D0047Z cable hatch. The box provides a neat “all in one” location for portable systems.
Penn State Side Line Helmet Repair Work Station
This case was designed for Penn State University as a side line helmet repair work station. The trunk features 12 Tilt Lock bins mounted in the lid. Each Tilt Lock bin features 3 individual storage compartments each, for a total of 36 individual compartments. The case lid also features a cordless drill storage compartment with a clear Lexan door. The drill’s battery charger is also mounted in the lid for quick access. A 6 outlet power strip is located in the center of the lid to provide easy access to power. The power strip is hard wired to a recessed male Hubbell inlet located on the back of the case. The case lid also features colored LED tape lights allowing for visibility in low lit environments.
5 Drawer Production Workbox w/Hinged Lid & Flip Up Shelf
This case was built for Applied Audio as a generic catch all work box. The outer case is built out of ½” plywood laminated with your choice of ABS plastic colors. Each drawer is built out of ½” Baltic Birch and is mounted on HD Accuride drawer glides. The drawers feature a ½” plywood face with a recessed handle as a pull. All drawer edges are routed. The drawers are coated with clear lacquer inside and out.
Nikon D810 Camera System Pelican 1510 Case
This case was built for Elevate Life Church to hold a Nikon D810 camera body and lens kit.
Sony Camera Chain Case
This case was designed for AVI-SPL to hold a Sony camera system. The case holds all camera components for rental applications including the camera body, preview monitor, lenses, camera control unit, cable reel and Telex com head set.
Chauvet Geyser RGB Fog Machine Case
Custom ATA road case designed to safely transport six Chauvet Geyser RGB fog machines for Audio Images. Each fixture is secured upside down in precision CNC-cut foam to allow clamps to remain attached for faster setup. The case features a removable dual-layer tray system, a rear carpet-lined accessory compartment, rugged 3/8” plywood construction with black ABS laminate, recessed hardware, stacking caster cups, and heavy-duty 4” casters for tour-ready durability and efficient truck pack.