Mixing Consoles
Presonus 16.4.2 Roadcase
This case is designed for a Presonus 16.4.2 mixing console. The console is held in a 1" foam lined interior with a 4" accessory compartment behind the console for storage. The front foam is notched to allow easy access to the console's headphone jack. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and has 3 recessed handles.
Presonus Studiolive 24.4.2 Travel Case w/iPad Compartment
This case is designed to be a lightweight carrying case for the Presonus Studiolive 24.4.2 console. The case is built out of 1/4” plywood and features a 1” Ester foam lined interior. The console is held in place by 2 Marine Grade plastic side rails, the case interior also features storage for an iPad in the case lid. The case also features a telescoping aluminum handle and inboard dolly casters, both the handle and wheels are field replaceable with a phillips screwdriver.
Midas F16 Console Case With Companion Rack
This kit was designed for Hunter Productions as a mobile audio/video system for covering Nascar events. The top case holds a Midas F16 mixer and features a custom doghouse and articulating laptop arm. The laptop arm is mounted inside the doghouse and protrudes through the top lid. The doghouse lid can be opened independently of the laptop mount and both can be used simultaneously. The Midas F16 case features a 4RU rack section and is latched onto the bottom rack.
Calrec Artemis Console & Mix Engine Case Set
These cases were designed for Game Creek Video for their Calrec Artemis Mix System. The console case features a custom foam lined interior that contours the console and provides extra support for the meter bridge display. The design allows the console to sit in the tray of the case during use without blocking any vents and still keeping the function of the integrated keyboard tray. The case is built out of 1/2" plywood laminated with black ABS plastic and features 12 deep recessed handles and 4" x 2" Colson casters with a full 3/4" Birch caster pad.
Custom Behringer x32 Road Case w/iPad Holder
This case provides a durable home for your Behringer x32. The case interior features a 2" foam lined interior with custom foam blocking around the console to keep it secure even during rough handling. Mounted behind the console is a doghouse that is built out of 3/4" Baltic Birch plywood and finished with black texture coating. The doghouse features a custom holder for an iPad that allows it to be displayed and also easily accessible to grab it and go. The doghouse iPad holder is beneficial over a mount in the sense that it allows you to quickly grab the iPad without detaching it from a mount. If you aren't using an iPad, the holder works great as a safe spot for scripts or set lists. During transport, the iPad is stored in the case lid which allows the case to ship as a complete package; perfect for rental applications.
Presonus 24.4.2. Audio Flypack Workstation
This case was built for Creative Live as the audio portion of a portable audio & video mobile rig, CLICK HERE to see the matching video case. The case features a rack mount section for the Presonus StudioLive 24.4.2 with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.
Custom Midas M32 Case
This case was designed for Image Of God Ministries for a Midas M32 console. The case is a 3 piece design that features a removable front and top lid in addition to a doghouse for cable management.
Klondike Sound Custom Yamaha QL5 Case
This case was designed for Klondike Sound. The case is a 3 piece design and features a custom 12" doghouse with an inset lid.
Yamaha QL5 Mixer Case
This case was designed for the Yamaha QL5 console. The case is a 3 piece design allowing the console to sit in the case tray during use.
Rane Sixty-Two Mixer Case
This case was designed for DJ Rich Marlowe, the case holds the Rane Sixty-Two mixer in a custom CNC cut foam insert. The foam insert accommodates for all knobs and protrusions of the mixer allowing the case to be turned upside down with out any knobs hitting the foam.
Midas Venice F16R Case
This case is designed for the rackmounted version (F16R) of the Midas Venice F16 mixing console. The case features angled foam blocks that contour the rack ears of the console and trap it in the case without touching the knobs or faders. The case tray features plastic strips the prevent the feet from sinking into the foam. The exterior case is built out of 1/4" plywood (thicker plywood is available on request) to keep it as lightweight as possible. The console can be used in the case tray.
Yamaha CL5 Case
The case features a strategic foam lined interior, all surfaces not covered in foam are treated with our black textured coating. Foam touches the console only at specific points allowing for substantial cost and weight savings. The consoles wood arm rest is cradled in a custom CNC cut Crosslink foam insert holding it in place and also protecting it from scraching. Operation manuals, Littlelites and cables are held on either side of the "Yamaha" foam block under the console. The rear of the console is covered by an 8" Baltic Birch doghouse that black texture coated.
Waterproof Case For Presonus 16.0.2. Mixer
This case was designed for the Presonus 16.0.2. mixer. The design is based around the Storm iM2720 waterproof case and features a custom CNC cut foam insert. The mixer slides into the insert by placing the arm rest in first. The foam insert holds the mixer from the top as well as the sides to provide maximum protection for your mixer. Under the mixer is a combination storage compartment that contours your iPad, below the iPad compartment is additional storage for cables. The iPad compartment is designed around an iPad in an Otterbox to accommodate most all aftermarket iPad cases.
The storm case features dolly casters and an extendable handle for easy transport.
Presonus 16.0.2. Mixer Roadcase
This case was designed for the Presonus 16.0.2. mixer. The case is built out of 1/4″ plywood and features a telescoping aluminum handle and inboard dolly casters. There is a storage compartment under the board for storage that is large enough to fit an iPad.
Presonus 16.0.2. Case – LM XL Series
This case is designed for the Presonus 16.0.2. mixing console. The case is part of our XL Series line of cases, these cases feature a custom aluminum extrusion wrapped around a 1/4″ piece of plywood. The aluminum extrusion utilizes an interlocking tongue and groove to allow for strong lid and base alignment. The aluminum and plywood panel combination results in a strong, lightweight and inexpensive case.
The mixer is surrounded by 1″ foam and has a 2″ deep accessory compartment below the mixer. The exterior case is equipped with 2 surface mounted twist latches and 3 surface mounted spring loaded handles. Any of our standard colors are available at no additional charge.