Products
Custom Workbox w/Clear Drawers & LED Backlighting
This custom workbox was built for Imagination America. The custom 14 drawer workbox features stunning clear Lexan drawers with LED back lighting.
Yamaha CS-R5 Rivage PM5 Road Case w/Doghouse
This custom case was built for Mohegan Sun casino for the Yamaha Rivage CS R5 Control Surface. The case interior is lined with custom CNC cut foam that contours the unique shape of the console. The console is held in place from the bottom and back in a Baltic Birch enclosure. The rear of the console is hidden by a doghouse. Built from ¾” Baltic Birch, the doghouse features a double hinged top lid and 2 removable rear vented panels with Southco latches.
4 Space Fly Rack w/Pelican 1620 Case
This 4RU portable flypack is designed portable fly dates in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 13” - 11”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage.
2U Solid Walnut Angled Studio Desktop Rack For IO, Router Panels & Preview Monitors
The 2U angled studio rack is designed for desktop applications where a router panel or IO panel are required. Built from solid walnut, this rack is both durable and aesthetically pleasing for mobile and fixed production environments.
Modular Generic RCP Case - 4 Capacity
This case is designed to hold remote control panel style camera controllers for National Micro Rentals. The case features a removable inner caddy allowing it to operate outside of its exterior road case. The caddy features a slidable top panel allowing a variety of RCP sizes to be used.
Apple Mac Mini Transport Case
This custom case is designed to hold an Apple Mac Mini computer. The Mac Mini is held in a custom CNC cut PE foam insert. The computer compartment features finger slots for the easy removal. An accessory compartment is provided for the power cable and any additional items that need to travel with the computer. The foam insert is mounted in a waterproof SKB iSeries case.
Apple Mac Studio Computer Travel Case
This custom case is designed for the Apple Mac Studio computer and accessories. The case features a custom CNC cut PE foam insert. Separate compartments are included for the Studio computer, a mouse and a keyboard. A 7” x 6” x 4” compartment is provided for miscellaneous cables and accessories.
19 Pin Socapex Rack Mount Break Out Box w/Edison Duplex Outlets
The LM Tour Systems 6 circuit break out box is designed for applications requiring rack mounted duplex outlets within a Socapex infrastructure. The HD black anodized rack mounted chassis features a front mounted Socapex inlet with 6 front mounted duplex outlets. Each outlet is wired with separate grounds allowing for isolation between circuits. Each Hubbell 5362 outlet is labeled 1-6 and shows the corresponding pinouts for troubleshooting. The center Socapex pin is not terminated.
Meyer x20 Speaker Road Case - 2 Capacity
This custom case is designed for the Meyer x22 speaker with stand mount adapter attached. Each speaker is held in an individual foam compartment. The foam insert is designed to accommodate the stand mount adapter. A carpet lined accessory compartment is provided for additional storage.
Panasonic ET-D3LET80 Projector Lens Case
This case was built for Panavid to hold a Panasonic ET-D3LET80 projector lens. The case features a custom CNC cut foam interior. The lens is held by cradles built from non-abrasive Crosslink foam. The Crosslink foam allows the lens to be transported without caps if desired. The center section of the case is finished with black carpet.
Orange OBC410 Bass Cabinet Case
The custom case is designed for the Orange OBC410 bass cabinet. The cabinet is held in a 1” PE foam lined interior. 2” PE foam is used underneath the cabinet for additional support. The lid pulls over the speaker cabinet allowing it to live in the case tray during a performance.
Orange AD200B Bass Amplifier Case
This case is designed for the Orange AD200B bass amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp head. The lid is removable with the amp living in the case tray. The lid features 3 deep recessed handles and 4 large, recessed latches. The case is built from 3/8” plywood laminated with your choice of ABS plastic colors.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Bubble Group Tour Merchandise Case
This custom merch tour case built for The Bubble Group is a fully integrated mobile retail display designed for touring merchandise sales. It features six heavy-duty shelves, dual armoire-style slat wall doors, color-changing LED shelf lighting, and a flip-up 50” monitor for digital signage. Built from rugged laminated plywood with recessed hardware and casters, the case combines durable transport protection with an eye-catching, show-ready merchandising experience.
Yamaha DM3 Tour Grade Mixing Console Road Case
This heavy duty, tour grade case is designed for the Yamaha DM3 audio console. The custom case’s foam lined interior features angled foam blocks the contour the console shape. A doghouse is provided to hide all rear console connections. The doghouse is built from ½” Baltic birch and features a double hinging design for full access. The doghouse is finished in black textured coating.