Products
16 Capacity iPad Transport/Charging Case
This custom transport and charging case is designed to store and charge up to 16 iPads, accommodating both standard and Pro models.
Each device is protected in custom-cut, non-abrasive Crosslink foam compartments, with removable inserts that adjust the height for smaller iPads. The case includes a custom LM Tour Systems charging unit with 16 USB ports and USB-C cable looms, allowing all devices to charge simultaneously.
Power is supplied through a 15 ft heavy-duty cable with locking Powercon connectivity, and an additional Powercon outlet allows linking multiple systems or adding courtesy power outlets.
The system is housed in a rugged, waterproof Pelican 1630 case with lifting handles, a retractable pull handle, and dolly wheels, making it ideal for secure transport and charging in demanding environments.
17 Space FOH System Drive Rack w/Drawer
This custom FOH processing rack case is designed to store and transport rack-mounted equipment and accessories for front-of-house audio systems, while also being adaptable for wireless microphone, video processing, or other rack applications.
The case features a shock-mounted 17U rack with front and rear rails, isolated by 2” foam to protect sensitive equipment during transport. A heavy-duty storage drawer made from Baltic Birch provides additional space for miscellaneous gear and accessories.
Constructed from ABS-laminated plywood, the case includes 4” Colson casters for mobility and custom MSA logo and “FOH Drive” stenciling, making it a durable and clearly labeled solution for live production environments.
Transport Case For Neumann KH120 II Studio Monitors
This custom speaker transport case is designed to safely store and transport two Neumann KH120 II studio monitor speakers.
The interior features 1” PE foam lining with 2” foam padding beneath each speaker for shock protection. A ¼” marine-grade plastic top cap is integrated into the tray to prevent the speakers from damaging the foam during loading and transport.
The exterior is constructed from ABS-laminated plywood and includes recessed handles, stacking caster wells, and 4” Colson casters mounted on a reinforced caster board, providing durability and easy mobility.
Tour Managers Workbox w/Walnut Drawer Faces & Printer
This custom tour manager workbox built by LM Cases for Do Good Management is designed to securely store office supplies and a printer in a compact, mobile format. The case features a hinged printer compartment with a dry erase whiteboard lid, a locking slide-out printer shelf, integrated power and network connectivity, and seven heavy-duty drawers with solid walnut fronts. Built from durable plywood with black ABS laminate and mounted on eight 4” casters, the workbox is engineered for reliable touring and day-to-day production use.
Custom Installed Solid Walnut Conference Room Workbox
This custom furniture-grade equipment case was designed to store wireless microphones, belt packs, and communication devices in a conference room installation while blending into a professional interior environment.
Constructed from solid walnut with dovetail joints, the case matches the size of a 16-space studio rack for coordinated installations. It includes four drawers: one for Shure ULXD handheld microphones, one with adjustable dividers for accessories, one with foam for Clear-Com belt packs, and one for Shure rechargeable batteries.
The case also features rack spaces for additional equipment, with a 1U section on top and a 2U section below, along with rear rack rails concealed by a walnut panel. Recessed handles and locking casters provide discreet mobility.
Custom Workstation For Follow Me Tracking Mouse & Fader Set
This custom portable workstation case was designed to support Follow-Me tracking equipment in a fully wired, mobile setup.
The lid houses a 24” Dell UltraSharp monitor mounted on a tilting bracket, with integrated HDMI and power cabling. Gas springs assist with opening and keep the lid secure during use, while foam supports protect the monitor during transport.
The main compartment includes a cable management doghouse, a 1U rack section for additional equipment, and custom brackets for the Follow-Me Mouse and Fader units. A solid cherry wood wrist rest and a slide-out shelf provide ergonomic operation and additional workspace.
Rear trap-door access allows connections to external gear, with 4U of rack rail available for patch panels. The case is built from ABS-laminated plywood with stacking runners for easy transport and storage with other cases.
Custom Workstation Road Case For A ETC Apex 5 Lighting Console
This custom lighting workstation was built for Walt Disney World to house an ETC APEX 5 lighting console for outdoor show use.
The workstation features a slide-out shelf for the console with integrated power outlets and USB charging, along with a pole-mounted monitor on an articulating mount. A cable management doghouse and trough system keeps wiring organized and protected.
The lower section includes a 13U shock-mounted rack with cooling fans, temperature monitoring, and a custom LM Tour Systems I/O panel providing power, network, and fiber connectivity. A dedicated foam-lined compartment stores the monitor safely during transport, and two storage drawers provide additional space for accessories.
Built from ABS-laminated plywood, the workstation includes sliding pocket doors, recessed hardware, and heavy-duty Colson casters, creating a durable, mobile solution for professional lighting control.
4RU Flyable Network / DSP Rack For Audio Deployments
This custom flyable network rack was built for Brown Note Productions to position network switches and DSP equipment close to PA arrays.
The system features a welded steel fly frame with a 4U rack, designed to be suspended from a line array bumper. The inner frame includes six forged steel hoist rings—four for load bearing and two for safety tethers—each rated for high load capacity with industry safety certifications.
The rack includes front and rear rack rails, safety blocks to prevent equipment from slipping out, and a marine-grade plastic dust cover with space for cable routing. Vibration isolation mounts separate the inner fly frame from the outer case to protect equipment during operation.
The exterior is built from ABS-laminated plywood with recessed handles, serving as a protective shell while the internal frame supports the load when flown.
Broadcast CCU / Switcher Rack Flypack
This custom ENG broadcast rack case was built for Panavid to support mobile broadcast and production workflows.
The case features an upper 12U rack section designed for preview monitors and scopes, along with a perpendicular 1U rack space for a Clear-Com base station. Behind the rack are three storage drawers with configurable dividers for organizing accessories and equipment.
A locking center drawer houses a Blackmagic ATEM switcher and Panasonic camera controller, with additional rack space for a router panel and an integrated wrist rest for operator comfort.
The lower section includes a 24” deep 12U rack with adjustable rail sets for additional broadcast gear. Constructed from ABS-laminated plywood, the case features recessed handles, locking casters, and removable lids with table legs, making it a durable and mobile solution for broadcast environments.
Custom Case For Apple Studio Display w/Tilt & Height Adjustable Stand
This custom transport case is designed to protect and transport a 24” Apple Studio Display with tilt and height-adjustable stand.
The monitor is stored face-up in a custom foam insert that accommodates the display’s hinge mechanism. Non-abrasive Crosslink foam protects the glass screen and bezel, while a central cutout allows space for the tethered power cable. Two additional compartments provide storage for accessories.
The case exterior is constructed from ABS-laminated plywood and includes five recessed handles for easier handling during transport.
Custom Case For Apple Studio Display w/Tilt Adjustable Stand
This custom transport case is designed to protect and transport a 24” Apple Studio Display. The monitor is stored face-up in a custom foam insert that accommodates its tilting hinge, while non-abrasive Crosslink foam protects the glass screen and bezel. A central cutout allows space for the tethered power cable, and two accessory compartments provide storage for additional items. The exterior is constructed from ABS-laminated plywood and features five recessed handles for easy transport.
Coffee Maker Amenities Case For Northwestern University
This custom coffee and amenities workstation case was built for Northwestern University to provide a mobile beverage and refreshment station.
The case includes a commercial Keurig coffee maker on a slide-out shelf with custom retention and a drip coffee urn used to serve the university’s special blend known as “Jarv Juice.” An illuminated sign with the Northwestern logo and purple LED lighting indicates when the coffee is ready. The system also features a cup dispenser, paper towel dispenser, and multiple storage drawers for supplies.
A built-in refrigerator with a glass door and LED lighting provides cold storage, while additional drawers with dividers organize beverages and accessories.
Power is supplied through a locking Neutrik True1 inlet with a 25 ft cable, ensuring secure power during use. The case is built from ABS-laminated plywood with fold-flat front doors, recessed hardware, and heavy-duty field casters, creating a durable mobile coffee station for events and team operations.
Custom Installed Video Flypack w/Pocket Doors
This custom video flypack was built for Clair Global as part of an installed production system for a casino.
The top lid includes two 12U rack bays for video monitors and a foldable sunshade made from marine-grade plastic to improve screen visibility during use. Below the lid is a Formica-laminated work surface and a sliding workstation with multi-position locking glides.
Behind the work surface is a dual 4U rack section for patch panels, along with two 9U rack sections featuring adjustable rails for additional video equipment. The rack fronts use pocket doors, while the rear remains open for easier access and airflow.
The case is constructed from ABS-laminated plywood with recessed hardware, stacking caster wells, and 4” Colson casters, creating a durable mobile system for internal video production operations.
5 Drawer Workbox w/LED Lighting In Each Drawer
This custom 5-drawer workbox was built for Helsinki Pro Audio systems engineer Vile to organize tools and accessories at the front-of-house (FOH) position.
The case includes five Baltic Birch drawers mounted on heavy-duty glides, each carpet-lined and isolated from the exterior by foam for protection. Every drawer features custom color-changing LED lighting that can be disconnected via XLR connections if the drawers need to be removed.
The top drawer includes a True1 power outlet and a 4-plex outlet bank, powered by an integrated LM Tour Systems power supply and a 25 ft True1 power cable.
Constructed from ABS-laminated plywood, the case features multiple recessed handles for lifting and pulling, 4” casters for mobility, and stacking caster wells that allow another case to be securely stacked on top.
Show Control / System Processing Installed Cart
This custom show control cart is designed for installed production environments, such as show control systems and PA processing. Its all-black finish allows it to blend discreetly into venues and control rooms.
The cart features a dual-monitor Ergotron mount, a Formica-laminated work surface, and a 2U rack section with a dimmable gooseneck work light and LED rack lighting controls. A slide-out shelf with multi-position locking provides additional workspace.
Below the surface is a 14U rack with front and rear rails and a vented rear door, offering space for processing equipment. Constructed from Baltic Birch with a textured finish and mounted on locking casters, the cart provides a durable and mobile control workstation.